0
0

Lee Precision 44 Special/Magnum Breech Lock Carbide Micrometer 4-Die Set

UPC: 734307919382

$70.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision 44 Special/Magnum 4-die set is built for handloaders who want consistent, repeatable ammo without a lot of fuss at the bench. It covers both 44 Special and 44 Magnum in one kit, and the standout piece is the micrometer bullet seating die. Instead of the old routine of seat, measure, tweak, and repeat, you dial in your setting on a laser-engraved scale marked in thousandths and go. Write your number down, and when you switch bullet styles or come back to a favorite load, you return to the exact same depth in seconds.

What Sets This Lee Precision 44 Die Set Apart

Carbide is the workhorse here. The full-length sizing die uses a carbide ring, which means you can skip the case lube step entirely on this straight-wall pistol brass. That alone saves a mess and a fair amount of time. The set includes four dies total: the carbide full-length sizing die, a powder-through expanding die, the micrometer bullet seating die, and Lee's Factory Crimp Die. The seating die handles anything from a light taper to a full roll crimp, which matters on 44 Magnum where a solid roll crimp keeps bullets from walking under recoil.

Breech Lock Quick-Change Made Simple

Every die comes with a color-coded spline-drive Breech Lock bushing factory installed. If your press runs the Breech Lock system, you set each die once, lock it in the bushing, and from then on it drops in and out with a quick twist. No re-adjusting between sessions, and the colors make it easy to grab the right die at a glance. These are standard 7/8-14 thread dies, so they thread into just about any common press including Lee, Dillon, Hornady, and RCBS.

Round it out with the included universal shell holder, powder dipper, and printed load data, and you've got a complete starting point for turning range brass into quality 44 Special plinking rounds or stout 44 Magnum loads.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 91938
  • UPC: 734307919382
  • Caliber: 44 Special / 44 Magnum
  • Number of Dies: 4
  • Die Construction: Carbide
  • Seating Die: Micrometer adjustable, .001 inch increments
  • Thread: 7/8-14 standard
  • Bushings: Color-coded spline-drive Breech Lock, factory installed
  • Crimp Type: Adjustable, slight taper to full roll crimp
  • Case Lube Required: No, carbide sizing
  • Shipping Weight: 1.52 lbs

What’s Included

  • Carbide Full Length Sizing Die
  • Powder Through Expanding Die
  • Micrometer Bullet Seating Die
  • Carbide Factory Crimp Die
  • Color-coded spline-drive Breech Lock bushings (factory installed on each die)
  • Universal Shell Holder
  • Powder Dipper
  • Printed instructions and load data

Frequently Asked Questions

Do I need case lube with this Lee 44 die set?

No. The full-length sizing die uses a carbide ring, so you can size 44 Special and 44 Magnum brass without lubing your cases first. That's one of the big perks of carbide dies on straight-wall pistol brass, and it keeps the whole process cleaner and faster.

What does the micrometer seating die actually do for me?

It lets you set your bullet seating depth precisely and repeatably. The scale reads in thousandths of an inch, so you can log your setting, change bullets, and come right back to the exact depth without the trial-and-error of a standard die. It also handles seating and crimping in one step, with adjustment from a light taper crimp up to a full roll crimp.

Will these dies fit my press if it isn't a Lee?

Yes. These are standard 7/8-14 thread dies, which is the common size used across nearly every modern press including Dillon, Hornady, and RCBS. The color-coded Breech Lock bushings are the quick-change bonus, but if your press doesn't use the Breech Lock system you can simply thread the dies in directly.

Can this set load both 44 Special and 44 Magnum?

It can. The same dies cover both cartridges since they share the same bullet diameter, so you can run light 44 Special loads or full-house 44 Magnum from one set. On magnum loads a firm roll crimp is worth setting up, since it helps keep bullets from backing out under heavy recoil.

Additional information

UPC

734307919382

Manufacturer

Manufacturer Part Number

91938

Shipping Weight

1.52

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 44 Special/Magnum Breech Lock Carbide Micrometer 4-Die Set”