Description
Finding reloading dies for the .41 Swiss (10.4x38R) is no small feat, and Lee is one of the only makers still running them. This 2-die set covers the Swiss Vetterli crowd who want to keep an old rifle fed, pairing a full length sizing die with a micrometer-adjustable bullet seating die. The sizer brings cases back to spec, which matters a lot when you're working with reformed brass, and the micrometer top on the seating die lets you dial repeatable seating depth and return to a known setting without guesswork.
What the Lee 41 Swiss 2-Die Set Brings to the Bench
These are produced in very limited runs, which is part of why they exist at all for a cartridge this old. The dies use the standard 7/8-14 thread, so they'll thread right into any common single stage or turret press from Lee, RCBS, Lyman, Hornady, or Dillon. The set ships with a universal shell holder and instructions. Worth noting up front: because the .41 Swiss is an obsolete cartridge, a powder dipper and published load data are not included with this set.
Feeding an Obsolete Cartridge With the Lee 90411 Die Set
Most folks running a Vetterli these days are building brass from .348 Winchester or 8mm Lebel, then loading a .423 to .430 cast bullet in the 300-plus grain range. The micrometer seating die earns its keep here, since Vetterli chambers are long and shallow and often want the bullet seated out close to the rifling for the best accuracy. Being able to adjust seating depth precisely and come back to it later makes load development a lot less frustrating.
One thing to plan for: the shell holder included works for a lot of setups, but depending on which parent brass you choose and your particular rifle, some loaders end up sourcing a different shell holder to match their cases. That's common territory with a conversion cartridge like this, and it's good to know going in so you can order the right one alongside your brass.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90411
- UPC: 734307904111
- Cartridge: 41 Swiss (10.4x38R)
- Gun Type: Rifle
- Die Type: 2-Die Set
- Dies Included: Full Length Sizing Die, Micrometer Bullet Seating Die
- Thread: 7/8-14 (fits standard presses)
- Material: Steel
- Production: Very Limited Production
- Warranty: 2-Year Guarantee
- Shipping Weight: 0.8 lbs
What’s Included
- Full Length Sizing Die
- Micrometer Bullet Seating Die
- Universal Shell Holder
- Instructions
Frequently Asked Questions
What does the Lee 41 Swiss 2-die set include?
The set comes with a full length sizing die, a micrometer bullet seating die, a universal shell holder, and instructions. Because the .41 Swiss is an obsolete cartridge, a powder dipper and printed load data are not included. Everything else you need to size and seat is in the box.
What brass can I use with these 41 Swiss dies?
Most loaders form .41 Swiss brass from .348 Winchester or 8mm Lebel cases, since loaded factory ammo isn't available anymore. 8mm Lebel tends to be the easier starting point for many since its rim and base dimensions are friendly, while .348 Winchester sometimes needs the base turned or filed down slightly to chamber. Expect to anneal, trim, and fireform as part of the process depending on your rifle.
Will the Lee 41 Swiss dies fit my press?
Yes. These dies use the standard 7/8-14 thread, so they'll screw into virtually any common reloading press, including Lee, RCBS, Lyman, Hornady, and Dillon. If you have a basic single stage or turret setup, you're good to go.
Why does the micrometer seating die matter for the Vetterli?
Vetterli chambers are long and run more like a forcing cone, so accuracy often improves when the bullet is seated farther out toward the rifling. The micrometer seating die lets you adjust seating depth precisely and return to a repeatable setting, which takes a lot of the trial and error out of load development with a finicky old rifle.




Reviews
There are no reviews yet.