Description
The Lee Pacesetter 3-Die Set in .308 Winchester is one of those sets that just makes sense for the handloader who wants everything in one box. You get three hardened steel dies covering the full cycle of loading a bottleneck rifle round, and because Lee throws in the shell holder, powder dipper, and load data, there's no scrambling for odds and ends before your first session. It's a popular pick for anyone feeding a .308 or 7.62×51 bolt gun, semi-auto, or hunting rifle, and it threads into standard 7/8-14 presses, so it drops right into Lee, RCBS, Hornady, Lyman, Dillon, and the rest.
What the Lee Pacesetter 3-Die Set Brings to the Bench
The set runs a full-length sizing die with a decapping stem, an Easy Adjust Dead Length bullet seating die, and Lee's exclusive Factory Crimp Die. The full-length sizer works brass back to spec, which is the way to go when you're loading mixed range brass or running an auto-loader that needs reliable chambering. The dead-length seater is built around consistent seating depth, which keeps your overall length uniform round after round. The Factory Crimp Die is the real standout here, applying a solid, repeatable crimp that tightens up accuracy and helps ammo cycle and feed like factory stuff.
Loading .308 With the Pacesetter Set
Longtime Lee users tend to agree these dies hold up for the long haul and don't wear out under normal use. Setup takes a little know-how the first time through, as any rifle die does, but once dialed in the system is straightforward and repeatable. The Factory Crimp Die is adjustable from a light taper to a firm roll, giving you room to tune crimp tension to your bullet and intended use, whether that's precision range loads or hard-kicking hunting ammo.
Lee has been building affordable, dependable reloading gear since 1958, and this set carries that reputation. Everything tucks into the included plastic storage box, so your dies stay organized and protected between loading sessions. For a .308 handloader who wants a complete, no-nonsense starting point, this one checks the boxes.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90507
- UPC: 734307905071
- Caliber: .308 Winchester / 7.62x51mm NATO
- Dies in Set: 3
- Die Type: Full Length Sizer, Dead Length Bullet Seater, Factory Crimp Die
- Thread Size: 7/8-14
- Material: Hardened Steel
- Application: Rifle
- Shell Holder Included: Yes
- Shipping Weight: 1.2 lbs
What’s Included
- Full Length Sizing Die
- Easy Adjust Dead Length Bullet Seating Die
- Lee Factory Crimp Die
- Universal Shell Holder
- Powder Dipper
- Instructions with Load Data
- Plastic Storage Box
Frequently Asked Questions
What dies come in the Lee Pacesetter 3-Die Set for .308 Winchester?
The set includes a full-length sizing die with decapping stem, an Easy Adjust Dead Length bullet seating die, and Lee's Factory Crimp Die. You also get a universal shell holder, a powder dipper, and load data, so it's a complete starting point for loading .308 Winchester.
Will the Lee Pacesetter dies fit my press?
Yes. These dies use the standard 7/8-14 thread, so they thread into just about any modern single-stage or turret press, including Lee, RCBS, Hornady, Lyman, and Dillon. The included shell holder works in most presses as well.
Does this set work for both .308 Winchester and 7.62×51 NATO?
It does. The .308 Winchester and 7.62x51mm NATO share the same case dimensions for reloading purposes, so this set handles both. The full-length sizing die is a good choice when you're working with mixed range brass or loading for semi-autos that need reliable chambering.
What does the Lee Factory Crimp Die do?
The Factory Crimp Die applies a firm, consistent crimp that helps improve accuracy and gives you ammo that feeds and cycles like factory loads. It's adjustable from a light taper to a full roll crimp, so you can tune the crimp tension to your bullet and how you plan to use the ammo.





Reviews
There are no reviews yet.