Description
Running a .50 Beowulf and tired of paying premium prices for factory ammo? This Lee 50 Beowulf 4-Die Full-Length Steel Set is the go-to toolkit for handloading that big fat 12.7x42mm round at home. Lee Precision has been turning out affordable, dependable reloading gear since the late 1950s, and this set keeps that reputation intact by giving you all four core dies plus the shell holder in one box.
What the Lee 50 Beowulf 4-Die Set Handles
Inside you get a full-length sizing die, a powder-through expanding die, a bullet seating die, and a taper crimp die. The full-length sizer brings fired brass back to spec, the expanding die bells the case mouth so you can seat those .500-inch projectiles without shaving them, the seating die sets your bullet depth, and the taper crimp die closes things up clean. Worth noting: this is a steel set with a taper crimp die, not a carbide Factory Crimp Die, so a little case lube during sizing keeps things smooth. A universal shell holder and printed instructions come along for the ride.
Loading Tips for the 50 Beowulf Steel Die Set
The Beowulf is a low-pressure, straight-walled case, which means brass life is generally pretty good as long as you inspect and keep your case length in check. One thing every Beowulf loader should know: this cartridge runs on large pistol magnum primers, not rifle primers. Rifle primers sit a touch taller and can keep your AR from returning fully to battery. Since the bullets usually lack a cannelure, go with a light taper crimp, just enough to remove the belling from the expander, and avoid over-crimping so your rounds chamber easily.
Good to Know Before You Order
Load data and a powder dipper are not included with this set, so you'll want to grab a reliable manual or published .50 Beowulf data and a powder measure to go with it. Pair this with a sturdy single-stage press and a good caliper and you're set to start cranking out your own 'Wulf ammo.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90296
- UPC: 734307902964
- Caliber: .50 Beowulf (12.7x42mm)
- Product Type: Full Length
- Die Material: Steel
- Number of Dies: 4
- Crimp Style: Taper Crimp Die
- Shell Holder: Universal Shell Holder Included
- Country of Origin: United States
- Length: 5.8 in
- Shipping Weight: 0.85 lbs
What’s Included
- Full-Length Sizing Die
- Powder-Through Expanding Die
- Bullet Seating Die
- Taper Crimp Die
- Universal Shell Holder
- Instructions
Frequently Asked Questions
What dies come in the Lee 50 Beowulf 4-Die Steel Set?
You get four dies: a full-length sizing die, a powder-through expanding die, a bullet seating die, and a taper crimp die. A universal shell holder and printed instructions are also included. This is a steel die set, and the crimp die is a taper crimp die rather than a carbide Factory Crimp Die.
Does the Lee 50 Beowulf die set include load data or a powder dipper?
No, load data and a powder dipper are not included with this set. You'll want a current reloading manual or published .50 Beowulf data along with your own powder measure. Always work up loads using trusted published data for safe results.
What primers do I need for reloading .50 Beowulf?
The .50 Beowulf uses large pistol magnum primers, with the CCI #350 being a commonly referenced choice. Avoid rifle primers, since they sit slightly taller and can prevent an AR action from returning fully to battery. Magnum primers also help light off the ball powders often used in this cartridge.
Do I need case lube with this 50 Beowulf steel die set?
Yes. Because these are steel dies and not carbide, a light coat of case lube on your brass before running it through the full-length sizer keeps things smooth and prevents stuck cases. A fresh die can feel a little tight on the first few cases, so lube up and it'll break in quickly.



Reviews
There are no reviews yet.