$10.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anyone who has tried to adjust an A2 front sight with a bullet tip or a pair of pliers knows how frustrating it gets. The LBE Unlimited AR15 A2 Pencil Sight Tool takes that headache off the table. It slips over the four-notch A2 front sight post, presses down the detent, and lets you turn the post up or down for clean elevation changes. The slim pencil shape stows easily in a range bag, tool roll, or pocket, so it is always on hand when your zero drifts or you swap loads.
This one is all steel with a black oxide finish, which is a step up from the plastic and pot-metal versions floating around out there. The black oxide adds a bit of corrosion resistance and cuts glare, and the four prongs seat firmly in the sight post notches so you get positive engagement without slipping or chewing up the post. LBE builds this one in the USA, and it holds up to repeated use on the bench or out at the range.
Front sight adjustment is your elevation control on an A2 or M4-style post. Fire a group, see where it lands, and turn the post to move your point of impact. If your shots are landing low, you screw the post down; if they are hitting high, you back it up. Each notch of adjustment shifts impact a set amount downrange, so small turns go a long way once you are close to zero.
Whether you are building a rifle, running maintenance, or just want a proper tool instead of the old bullet-tip trick, this four-prong pencil tool earns its spot in the kit. It is simple, it is tough, and it does exactly one job well.
It engages the four notches on an A2-style front sight post, depresses the spring-loaded detent, and lets you rotate the post up or down. That controls elevation when you are zeroing your iron sights. It saves you from the old trick of using a bullet tip or fighting the post with pliers.
This is the four-prong version made for A2-style posts, which also covers standard M4-profile front sights. It is not set up for the five-notch A1 posts. If you run both A1 and A2 rifles, a double-ended tool with a four-prong and five-prong end would be the way to go.
Yes. The all-steel construction and black oxide finish give you firm, positive engagement with the sight post and hold up to repeated use without bending or rounding off. The black oxide also cuts glare and adds a little corrosion resistance, which is handy for a tool that lives in a range bag or tool roll.
If your shots are hitting low, turn the post down to raise your point of impact; if they are hitting high, back the post up to lower it. Fire a group, adjust, then fire again to confirm. Small turns move impact a fair amount at distance, so go in short increments once you are dialed in close.
| UPC | 784682014448 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ARPSTL |
| Color | Black |
| Model | |
| Product Type | Sight Tool |
You must be logged in to post a review.
Reviews
There are no reviews yet.