$26.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The LBE Unlimited Low Profile Gas Block is one of those parts you don't think much about until you're mid-build and realize the right one makes everything else easier. It's cut for a .750" barrel journal, which is the standard diameter on most mil-spec, government, and M4-profile AR-15 barrels. If your barrel is described that way, this is the size you want. The low-profile shape is the whole point, letting it sit close to the barrel so it slides cleanly under free-float handguards without any clearance headaches.
LBE builds this one from 4142 steel and finishes it in black nitride, a combination that shrugs off the corrosion and wear that come with sustained heat and pressure. It works across the full range of gas tube lengths too, so whether you're running a pistol, carbine, mid-length, or rifle-length system, this block plays nice with a standard gas tube. It's a proven pick for a fresh build, a handguard swap, or ditching a bulky front sight base for something slimmer.
The block ships with set screws and a gas tube roll pin, so you're not scrambling for small parts to wrap up the job. Slide it on with the gas tube hole facing the receiver, time it to 12 o'clock, and lock down the screws with a dab of high-temp thread locker. Builders who do this right consistently report a snug fit and clean gas port alignment.
One bit of real-world advice: for any set screw style block, dimpling the barrel under the rear screw is smart insurance. Without a dimple, the screws bear on the barrel with no positive seat and the block can creep forward under recoil, especially on harder nitride barrels. A quick dimple and some thread locker and this thing isn't going anywhere. Made in the USA and priced to keep your build on budget.
Yes. The low-profile design sits close to the barrel so it clears just about any free-float handguard on the market. It also works fine with standard drop-in handguards or with no handguard at all.
A .750" journal is the most common size on mil-spec, government, and M4-profile AR-15 barrels chambered in .223/5.56. Lightweight or pencil-profile barrels often use a smaller .625" journal instead. Always confirm the journal diameter with your barrel manufacturer's spec sheet before ordering.
It's not strictly required, but it's strongly recommended for any set screw style block. Dimpling gives the screws a positive seat so the block can't creep forward under recoil or heat, which matters even more on hard nitride barrels. Pair the dimple with high-temp thread locker and the block stays put for the long haul.
No, the gas tube is sold separately. This block ships with the set screws and a gas tube roll pin, so you just add the gas tube in the length your build calls for, whether that's pistol, carbine, mid-length, or rifle-length.
| UPC | 765857617749 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ARLPGB |
| Color | Black |
| Model | |
| Product Type | Gas Block |
You must be logged in to post a review.
Reviews
There are no reviews yet.