$17.99
26 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The LBE Unlimited Tri-Ports Flash Hider brings back the classic three-prong silhouette that defined early AR-15 and retro M16-style rifles. If you've been chasing that old-school profile for a clone build or just want your muzzle to look the part, this one nails the aesthetic while doing real work at the front of the barrel. It's threaded 1/2×28, so it drops right onto standard .223 Rem and 5.56 NATO barrels without any fuss.
The open triangle ports do more than look cool. Prong-style flash hiders break the escaping gas into smaller jets that cool and mix faster as they leave the muzzle, which cuts down on the visible fireball you'd otherwise get from a bare crown. That matters most in low light, where a big flash can wash out your vision between shots. The three-prong layout keeps the whole thing lightweight and low-profile, so you're not adding a bunch of length or weight out at the end of your rifle.
This is a natural pick for retro and clone builders who want the vintage look, but it works just as well as a straightforward flash-reduction upgrade over a plain thread or a tired old device. It fits AR-pattern rifles chambered in .223/5.56 running the common 1/2×28 thread pitch, which covers the vast majority of modern 5.56 barrels out there.
Installation follows the same routine as any standard muzzle device. You'll want a crush washer or a set of timing shims to get it clocked correctly and torqued down, plus a wrench to snug it into place. One thing worth knowing about open-prong designs like this: they can produce a slight "ping" or ring on firing since the equal-length tines behave a bit like a tuning fork. It's a normal trait of the style and doesn't affect performance. LBE Unlimited has built a solid reputation cranking out affordable, no-nonsense AR parts, and the Tri-Ports fits right into that lineup as a budget-friendly way to finish off a build.
It's threaded 1/2×28, which is the standard thread pitch for .223 Rem and 5.56 NATO AR-15 barrels, so it fits the great majority of modern 5.56 rifles. Just double-check your barrel's thread pitch before ordering. If your barrel runs a different thread, like 5/8×24 on a .308 or .300 Blackout, this isn't the right device.
Based on how this unit is listed, plan on supplying your own crush washer or timing shims for installation. It's a common, inexpensive part to pick up alongside the flash hider. You'll also need a wrench to torque it down and get the device clocked correctly.
They can. Open-tine designs with equal-length prongs sometimes produce a slight "ping" or tuning-fork ring when fired, since the prongs vibrate on each shot. It's a normal characteristic of the style and has no effect on how well the device works.
The triangular open ports split escaping gas into smaller jets that cool and mix faster, which cuts the visible flash you'd get from a bare muzzle. That's most noticeable in low-light conditions. It's an effective flash-reducing device that also delivers the retro three-prong look many builders are after.
| UPC | 706612408189 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ARFH-TP556 |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Black |
| Model | |
| Product Type | Flash Hider |
| Thread Pattern | 1/2"x28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.