$299.99
20 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The LaRue Tactical LT915 is a cantilever mount built for folks running a 34mm tube optic on a flat-top rifle who want the option to pull their scope and drop it right back on without chasing zero all over again. That's the whole point of LaRue's Speed Lever quick-detach setup, and it's the reason these mounts have a cult following. The cantilever design pushes the optic forward over the handguard or barrel nut, so you get proper eye relief without trying to bridge two separate sections of rail.
This version carries a built-in 20 MOA of forward cant, which tips the optic slightly nose-down so you've got more elevation left in the turret when you're reaching out to distance. If you shoot past a few hundred yards, that extra travel keeps your scope from running out of adjustment. The centerline sits at 1.535 inches above the rail, which lands in that comfortable range for a solid cheek weld on most AR-pattern rifles and bolt guns wearing a Picatinny rail.
Like the rest of the LaRue lineup, the LT915 is precision-machined out of bar-stock aluminum and finished with a hard, non-reflective anodized coating that shrugs off weather and hard use. The rings run threaded steel inserts and are cut to tight tolerances, which means you skip the whole lapping headache that comes with cheaper rings. The split vertical rings tie into a backbone that stiffens up the whole platform, so your optic stays put under recoil.
Guys who run these mounts talk about the same thing over and over: you can yank the optic to clean the rifle or swap it to another gun, throw it back on, and your point of impact doesn't wander. The levers lock down tight and take a real bit of effort to open once you dial them in with the included adjustment wrench, which is exactly what you want out of something meant to survive a lifetime of abuse. It's a mount you buy once and forget about, which is why it earns its keep on serious rifles.
Yes, that's the whole reason LaRue's Speed Lever system exists. When properly adjusted, you can pull the mount off the rail and put it back on with point of impact staying dead on. It's a reputation LaRue has earned across years of use on duty and competition rifles.
The 20 MOA of forward cant tilts your optic slightly nose-down, which frees up more elevation adjustment in your scope's turret. That extra travel matters when you're shooting at longer distances and don't want to run out of come-ups. If you mostly shoot inside a couple hundred yards, a 0 MOA base works fine, but the 20 MOA is the way to go for reaching out.
The LT915 clamps to any standard Picatinny or MIL-STD 1913 flat-top rail, so it works on AR-pattern rifles and bolt guns set up with the right rail. Just make sure your optic has a 34mm main tube to match the rings, and mount it on a single continuous section of rail rather than bridging two separate pieces.
The mount ships with an adjustment wrench so you can tune the lever tension yourself. You want them snug enough that they take a firm push to close and stay locked, which is what gives you that repeatable return to zero. Once dialed in, they'll take real effort to open, and that's exactly how they're meant to feel.
| UPC | 810143183856 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | LT91515352034 |
| Mount Height | 1.54" |
| Mount Type | Cantilever |
You must be logged in to post a review.
Reviews
There are no reviews yet.