$274.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The LaRue LT123 is a two-piece 30mm ring set built around LaRue's proven quick-detach lever system. Instead of wrestling with a bolt nut and a torque wrench every time you swap glass, you flip the levers, seat the rings on your Picatinny rail, and go. The big draw here is repeatable return to zero. Shooters who run these rings on everything from GAP-10s to Remington 700 builds report the optic drops right back on zero after being pulled and reinstalled, which is exactly what you want out of a QD mount.
These rings position the centerline of your optic 1.28 inches above the top of the rail, which is a standard height that plays nice with large objective bells. That clearance makes the LT123 a smart pick when you're mounting a scope with a 50mm or bigger front lens and you don't want the bell dragging on the rail or crowding your back-up iron sights. They lock onto any MIL-STD-1913 Picatinny rail, so they'll work across ARs, bolt guns, and just about any flat-top setup.
Being a two-piece design, the LT123 gives you flexibility on ring spacing. That's handy for stretching the front and rear rings to match your scope tube and dial in eye relief, or for shifting the optic forward when you're running a night vision device inline. The lever tension is adjustable, so once you get the clamping force set to your rail, the rings snap on tight and repeat consistently. LaRue's reputation for machining quality runs all the way through this set, and folks who've owned them tend to describe them as clamp-tight-and-forget hardware.
If you shoot more than one rifle and like moving a single scope between them, or you just want the option to remove your optic for cleaning and storage without losing zero, the LT123 is a proven, no-drama choice that's been trusted on precision rigs for years.
Yes, return to zero is one of the main reasons people buy these rings. Owners running the LT123 on AR-10s and bolt guns report solid, repeatable zero after pulling the optic and reinstalling it. Just set the lever tension correctly for your rail and the rings clamp back to the same spot every time.
The LT123 places the centerline of your optic 1.28 inches above the top of the rail. That standard height leaves room for scopes with large 50mm-plus objective bells, which is exactly what these rings were designed to handle. It's a good match when clearance over the rail or back-up sights is a concern.
The LT123 clamps onto any MIL-STD-1913 Picatinny rail, so it works across AR platforms, precision bolt guns, and other flat-top setups. LaRue notes these are a natural pairing with the LT113 base on Remington 700 rifles. As long as your rifle has a true Picatinny rail, you're good to go.
The quick-detach levers let you clamp the rings on and off the rail by hand once tension is set. A small wrench is included to adjust the lever tension so the clamping force matches your specific rail. You'll still need a torque wrench and driver to secure the scope in the ring caps.
| UPC | 810143180541 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | LT123 |
You must be logged in to post a review.
Reviews
There are no reviews yet.