$196.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Lapua has spent decades chasing precision in cartridge case manufacturing, and their 6.5 PRC brass is exactly what you'd expect from that reputation. This is factory-new, unprimed brass built for the reloader who wants a rock-solid starting point for long-range hunting or precision competition. It takes a Large Rifle Primer (LRP) and ships in the newer cardboard box designed to keep every case in pristine shape from the factory to your bench.
The 6.5 PRC was born for long range, and the bump in case capacity over the 6.5 Creedmoor or 6.5×55 SE lets you push velocities noticeably faster with heavier, high-BC bullets. That longer throat gives you room to seat the modern high ballistic coefficient projectiles that shine at distance, which is a big part of why this cartridge caught on so fast with hunters and match shooters alike. It pairs best with slower-burning powders and really comes alive behind bullets past the 150-grain mark.
Where Lapua earns its name is case life. The head is drawn exceptionally hard, so primer pockets stay tight through many firing cycles, and the body holds its dimensions whether you full-length size or neck size only. The necks are held to strict concentricity and wall-thickness tolerances, which pays off in cleaner ignition and better consistency downrange. Folks running this brass regularly report multiple reloads per case without failures, and plenty of top shooters lean on Lapua for that reason.
One thing worth knowing going in: 6.5 PRC chambers can run tight, and Lapua brass is on the thicker, harder side. If you're working with a snug chamber, make sure your sizing die is set up to bump the shoulder properly. Sort, prep, and prime it to your load, and this brass will reward the effort with the kind of accuracy and longevity that makes reloading worth doing in the first place.
It's built for a Large Rifle Primer (LRP) and accepts standard Boxer-type primers. Keep that in mind when you're stocking components for a load workup, since some competing 6.5 PRC brass uses different pocket setups.
This is new, unprimed brass only, not loaded ammo. You'll need to prime it, add powder, and seat a bullet to build a complete cartridge. Each box holds 100 factory-fresh cases ready for prep.
Lapua brass is known for going the distance, and reloaders commonly report multiple firings per case thanks to the hard-drawn head and tight primer pockets. Actual case life depends on your load pressure, sizing practices, and how well you prep. Run reasonable loads and take care of your brass and it'll serve you a long time.
6.5 PRC chambers can be on the snug side, and Lapua runs thicker and harder than some other brands. Make sure your full-length sizing die is set to bump the shoulder back enough for smooth chambering, especially after a couple of firings. A good die setup and shoulder measurement will keep everything running clean.
| UPC | 6418267200714 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 4PH6023 |
| Quantity | 100 Per Box |
| Shipping Weight | 3.635 |
You must be logged in to post a review.
Reviews
There are no reviews yet.