$213.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The .300 Winchester Magnum has earned its place as one of the most capable .30-caliber magnums out there, and the quality of your brass is where accurate handloads start. Lapua's 300 Win Mag cases are drawn from premium Finnish brass with the kind of quality control that separates match-grade components from the rest. If you want a case that behaves predictably across firing after firing, this is the stuff.
Lapua runs tight tolerances on the base, body, and neck so dimensions stay consistent through repeated reloading. The case heads are drawn exceptionally hard, which keeps primer pockets snug and round even after many cycles, something reloaders consistently point to as the reason this brass outlasts softer offerings. The body is tough and resilient, so cases extract cleanly whether you full-length size or neck size only. These come factory annealed, which extends case life and helps keep neck tension uniform shot to shot. Keep in mind that annealing can leave a slight discoloration on the neck until the case is cleaned, which is completely normal.
Uniformity is the whole point here. Tight case weight spread, consistent neck wall thickness, and clean primer pockets all add up to steadier velocities and tighter groups downrange. Reloaders working up loads often find Lapua cases run a touch less internal capacity than some other brands, so it pays to start low and work up rather than carrying over data from a different headstamp.
These ship unprimed and take a Large Rifle Primer. As with any new brass, resize before your first loading and check your trim length. With the .300 Win Mag handling bullet weights from the mid-100s up past 200 grains, this case is at home in everything from open-country big game hunting to long-range target work. Treat it right and a box of Lapua will reward you with a lot of reloads and the confidence that comes with knowing your components aren't the weak link.
No, these are supplied unprimed. The cases take a standard Large Rifle Primer, so you'll add your primer of choice during the reloading process. This gives you full control over your load development.
Yes. New unprimed brass should always be resized before your first loading to ensure consistent dimensions and proper chambering. It's also a good idea to check and trim case length as part of your prep. A quick inspection of the primer pockets and flash holes rounds out solid case prep.
Lapua 300 Win Mag brass is factory annealed, which extends case life and promotes consistent neck tension. The annealing process can leave a slight discoloration on the neck area, which is completely normal. It cleans up during tumbling or your usual case cleaning routine.
Reloaders often find Lapua cases run a bit heavier with slightly less internal volume than some other brands of .300 Win Mag brass. Because of this, you should start with reduced loads and work up rather than carrying over data from a different headstamp. Always develop your load with the specific brass you're using.
| UPC | 6418267200851 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 4PH7096C |
| Quantity | 100 Per Box |
| Shipping Weight | 4.14 |
You must be logged in to post a review.
Reviews
There are no reviews yet.