Description
The HUB standard changed the suppressor game, and adapters like this one are the reason why. The Lantac ADC Direct Thread HUB screws into the back of any suppressor with the common 1.375×24 HUB thread pattern and converts it to a clean 5/8×24 direct thread mount. That covers a huge range of cans from brands running the HUB interface, and it means your .30 caliber bolt gun, AR-10, or precision rifle with standard 5/8×24 muzzle threads is ready to go without a proprietary mounting system in the mix.
Built Like the Rest of the ADC Line
Lantac machines this hub from 17-4 PH stainless steel in H900 condition, then treats it with a QPQ nitride finish for wear and corrosion resistance that holds up under real heat and carbon. At 3.9 ounces it keeps the front end of your rifle from getting nose heavy, which matters more than people think on a hunting rig or a long day behind a precision gun. It is part of Lantac's patent pending Adaptable Core family and made in the USA.
Why the ADC Direct Thread HUB Stands Out
Two details set this one apart from the pile of generic HUB adapters out there. First, the design leaves room for a longer muzzle device underneath than most competing hubs allow, so you have more flexibility in how you set up the host rifle. Second, it torques to the suppressor with a standard armorer's barrel nut wrench instead of some one-off proprietary tool. Small things, but they make life easier at the bench.
Direct thread is still the go-to for a lot of precision work because there is less hardware between the barrel and the can, which tends to mean better concentricity and more consistent point of impact. If you like the simplicity of threading a suppressor straight onto the barrel and want your HUB can set up for 5/8×24 hosts, this is a clean, well-made way to get there.
Key Specifications
- Manufacturer: Lantac USA
- Manufacturer Part Number: HUB-ADC-DT-762
- UPC: 614347640494
- Model: Adaptable Core (ADC)
- Product Type: Direct Thread Suppressor HUB Adapter
- Barrel Thread: 5/8×24 TPI
- Suppressor Thread: 1.375×24 TPI (HUB standard)
- Material: 17-4 PH Stainless Steel, H900 Condition
- Finish: Black QPQ Nitride
- Weight: 3.9 oz
- Caliber Application: 7.62 / .30 Caliber
- Installation: Torques with standard armorer's wrench
- Country of Origin: USA
What’s Included
- Lantac ADC Direct Thread 5/8×24 HUB adapter
Frequently Asked Questions
Which suppressors will the Lantac ADC Direct Thread HUB fit?
It fits any suppressor built on the industry standard 1.375×24 HUB thread pattern, which covers a wide range of popular .30 caliber cans on the market. Once installed, the suppressor threads directly onto any barrel with 5/8×24 muzzle threads. Double check that your can is HUB compatible before ordering, since some suppressors use proprietary rear mounts.
Do I need special tools to install this hub?
No proprietary tools required, which is one of the nicer touches on this design. The ADC HUB is cut so it can be torqued into the suppressor with a standard armorer's barrel nut wrench. There is no timing or shim kit involved either, so setup takes just a few minutes.
Is this the steel or titanium version?
This is the stainless steel version, machined from 17-4 PH in H900 condition with a black QPQ nitride finish and weighing 3.9 ounces. Lantac also makes a Grade 6 titanium variant under a separate part number if shaving weight is your priority. The steel model is the more budget-friendly of the two and is plenty durable for hard use.
Will a direct thread mount like this affect my accuracy or zero?
Direct thread mounting is a favorite among precision guys because it puts minimal hardware between the barrel and suppressor, which helps with concentric alignment and consistent point of impact. As long as the hub and can are properly torqued, you should see repeatable results shot to shot. Just confirm your zero with the suppressor mounted, as any can will shift impact slightly compared to shooting bare muzzle.





Reviews
There are no reviews yet.