0
0

L.E. Wilson Stainless Steel Bullet Seater Die .338 Lapua Magnum

UPC: 815145021595

$79.20

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you load .338 Lapua Magnum and care about concentricity, this is the kind of tool that quietly makes your groups shrink. The Wilson chamber-type seater works differently than a standard threaded die. Instead of running your case up into a die on a conventional press, the case and bullet are fully captured inside a chamber that closely mirrors your rifle's, then a close-fitting seating stem pushes the bullet straight down into the case mouth. Everything is already aligned before the bullet moves, which is exactly why benchrest crowds have leaned on these for generations.

How the .338 Lapua Wilson Seater Earns Its Keep

This is a hand die, meant to run on an arbor press or with a mallet rather than a conventional press. The tight fit between the seating stem and the die body is no accident. These are machined from solid stainless bar stock, not cast, and each one is hand reamed to the correct headspace so the case sits exactly where it should. With essentially one moving part during seating, there's very little room for the bullet to tip or rock on its way in.

Dialing In Seating Depth on the BS33-LAP

Seating depth adjustments are made by turning the screw inside the cap, which uses 3/8"-24 TPI threads for fine control. It's a simple, repeatable setup that's easy to bring to the range when you're chasing a node and want to tweak your seating depth between strings. Once you find what your rifle likes, the die holds it.

Stainless construction means this die will outlast a whole lot of brass, and the made-in-the-USA build quality is exactly what you'd expect from Wilson. For anyone running a .338 Lapua in F-Class, PRS, long-range precision, or just a rifle they want to feed the best ammo possible, this seater is a straightforward upgrade over conventional dies.

Key Specifications

  • Manufacturer: L.E. Wilson
  • Manufacturer Part Number: BS33-LAP
  • Model Number: BS33-LAP
  • UPC: 815145021595
  • Caliber: .338 Lapua Magnum
  • Die Type: Chamber-Type Inline Bullet Seater
  • Material: Stainless Steel
  • Press Compatibility: Arbor Press or Hand/Mallet (not for conventional presses)
  • Seating Depth Adjustment: Cap screw, 3/8"-24 TPI threads
  • Construction: Machined from solid bar, hand reamed to headspace
  • Country of Origin: Made in the U.S.A.
  • Shipping Weight: 1.0 lb

What’s Included

  • L.E. Wilson stainless steel chamber-type bullet seater die (.338 Lapua Magnum)
  • Allen wrench
  • Instructions

Frequently Asked Questions

Does this Wilson bullet seater die work on a regular reloading press?

No, this is a chamber-type hand die designed for an arbor press or for use with a mallet. It does not thread into a conventional 7/8"-14 press. If you want the accuracy benefits of this style, an arbor press is the way to run it.

How do you adjust seating depth on the BS33-LAP?

Seating depth is set by turning the screw inside the cap, which uses 3/8"-24 TPI threads for fine, repeatable control. The setup is simple enough to adjust right at the range when you're testing different seating depths. Once dialed in, it holds its setting.

Why is a chamber-type seater more accurate than a standard seating die?

The case and bullet are completely captured inside a chamber that mimics your rifle's, so they're aligned before the bullet ever moves. A close-fitting seating stem then pushes the bullet straight into the case mouth, which keeps runout low. That alignment is why these have been a benchrest staple for decades.

Does this die have a micrometer top?

No, this is the standard cap-adjustment version of the .338 Lapua seater. Depth changes are made with the screw inside the cap. Wilson does offer a separate micrometer-top model if you want graduated adjustments, but that is a different part number.

Additional information

UPC

815145021595

Manufacturer

Manufacturer Part Number

BS33-LAP

Shipping Weight

1.0

Reviews

There are no reviews yet.

Be the first to review “L.E. Wilson Stainless Steel Bullet Seater Die .338 Lapua Magnum”