$135.52
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson 7mm PRC Micrometer Bullet Seater Die is the tool a lot of precision reloaders reach for when runout and seating consistency actually matter. Instead of threading into a conventional press, this is a chamber-type hand die that captures the case and bullet in near-perfect alignment before the bullet ever moves. The case sits still while the seating stem pushes the bullet straight in, and that difference is where the accuracy comes from. The result is loaded 7mm PRC ammo with very little runout, which is exactly what you want chasing small groups at distance.
The micrometer top is the headline feature here. You get an easy-to-read scale graduated in .001" increments, so dialing in a new seating depth or going back to a proven one takes seconds. For larger jumps, the cap uses 3/8"-24 TPI threads to make major adjustments, and the micrometer handles the fine-tuning from there. That combination makes it simple to bounce between different bullets or loads without losing your reference point, and it's a big reason competitive and long-range folks like this setup.
This is a hand die, built to be used with an arbor press or tapped with a soft-faced mallet. It is not made for a conventional threaded press. Most reloaders run it on a small arbor press because you can genuinely feel the bullet seating the whole way down, which helps you catch inconsistent neck tension before it becomes a flyer. Once you find a rhythm it moves quick, roughly ten to fifteen seconds a round.
Machined from long-lasting stainless steel and laser engraved for clear markings, this die is made in the U.S.A. and comes with the standard seating stem. If you shoot a VLD or high-BC bullet with a long secant ogive, Wilson offers a VLD stem separately that cradles the nose better. For standard projectiles the included stem does the job just fine.
No, this is a chamber-type hand die and is not made for a conventional threaded press. It is designed to be used with an arbor press or by tapping it with a soft-faced mallet. Most reloaders run it on a small arbor press because you can feel the bullet seating through the full stroke.
The micrometer gives you a scale graduated in .001" increments, so you can set and repeat seating depths with a lot of precision. For big changes you adjust the cap's 3/8"-24 TPI threads, then use the micrometer for the fine-tuning. It makes jumping between different bullets or loads quick while keeping your reference points.
It comes with the standard seating stem, which works great for most common bullet profiles. If you shoot long secant-ogive VLD or high-BC bullets, L.E. Wilson offers a VLD stem separately that cradles the bullet nose better. Many 7mm PRC reloaders pick one up to match their specific projectile.
Unlike conventional dies where the case moves relative to the die body, this one holds the case stationary while the seating stem pushes the bullet straight down. That keeps the bullet and case in tight alignment as they come together. The payoff is loaded ammo with minimal runout, which helps consistency and accuracy at long range.
| UPC | 815145029249 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | S7M-PRC |
| Shipping Weight | 1.0 |
You must be logged in to post a review.
Reviews
There are no reviews yet.