$17.60
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson 6mm BR Family New Case Holder is the piece that makes a Wilson-style trimmer so consistent. Instead of gripping the case head like a typical shell holder, this one supports the case along its body taper, much like the chamber of a firearm. That full-body support keeps everything aligned so your trim length stays identical from the first case to the hundredth. This is the NCH-BR, the "New Case" version built specifically for brand new brass and cases that have been full-length resized.
Despite the 6mm BR name, this single holder spans the whole Bench Rest family. It fits 20 BR, 22 BR, 6mm BR, 7mm BR, and 30 BR cases, and it also works across BRX calibers. If you shoot more than one cartridge off the BR parent case, that makes this one holder do a lot of work on the bench. Keep in mind that a new case holder is meant for new and full-length sized brass. Once your brass is neck sized only, you will want the fired case version instead, since neck sized cases take on a slightly different shape.
The holder is machined from billet steel here in the USA and finished to tight tolerances, which is exactly why benchrest and precision crowd reach for Wilson gear. Drop a case in, make your cut, and tap the case mouth to release it. Beyond trimming to length, the same holder supports primer pocket reaming, neck reaming, and deburring when paired with Wilson's uniform deburring tool. It is a simple, no-moving-parts tool that should give you a lifetime of use on the bench.
One thing worth noting from experience: some rifles cut on the generous side, and if you are running an oversized chamber, even resized brass may not seat fully in a new case holder. In that situation a standard holder is the better fit. For the vast majority of factory and standard-spec chambers, though, the NCH-BR is the right call for prepping fresh BR family brass.
This holder is built for the Bench Rest family of cartridges, including 20 BR, 22 BR, 6mm BR, 7mm BR, and 30 BR, and it also covers BRX calibers. Even though it carries the 6mm BR name, that single holder handles the whole BR group. If you load more than one cartridge off the BR parent case, this one tool covers all of them.
A new case holder like this NCH-BR is sized for brand new brass and cases that have been full-length resized. A fired case holder is sized for neck-sized-only brass, which carries a slightly different body shape after firing. If your brass is neck sized rather than full-length resized, you'll want the fired version instead.
Rather than clamping the case by its head, the holder supports the case along its body taper, much like a rifle chamber does. That full-body support keeps the case aligned and repeatable, so your trim length stays the same across an entire batch. It's the main reason precision and benchrest reloaders favor Wilson trimmers.
Yes. Along with trimming, it secures the case for primer pocket reaming, neck reaming, and deburring when paired with Wilson's uniform deburring tool, which is sold separately. It's a versatile part of a Wilson case prep setup.
| UPC | 815145028334 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | NCH-BR |
| Shipping Weight | 0.2 |
You must be logged in to post a review.
Reviews
There are no reviews yet.