$17.60
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're running a Wilson trimmer and working with belted magnum brass, this is the holder that keeps everything square and repeatable. The L.E. Wilson New Case Holder grips the case by its body taper rather than the case head, which is the same principle that makes Wilson's whole system so trusted on the bench. That geometry supports the brass much like a firearm's chamber does, so the case sits true to the cutter face and you get clean, consistent results pass after pass.
This particular holder, part number NCH-264WN, covers a healthy lineup of belted magnum cartridges including 264, 300, 338, and 358 Winchester Magnum, 308 and 358 Norma Magnum, 7mm and 8mm Remington Magnum, 458 Winchester Magnum, and 7mm STW. One holder handles the whole group because Wilson sizes their holders by case diameter and length rather than by a single caliber. Wilson machines these from steel and builds them in the U.S.A., and the fit and finish is exactly what you'd expect from gear meant to last decades on a reloading bench.
Beyond trimming, this holder earns its keep across the rest of your case prep routine. Pair it with Wilson's Uniform Deburring Tool and it holds the case steady for primer pocket reaming, neck reaming, and case mouth deburring too. When you're done, a quick tap on the case mouth pops the brass right back out, so there's no fighting or prying.
This is the New Case version, meaning it's cut for new brass and full-length sized cases. It's worth knowing that is different from Wilson's Fired Case holders, which are intended for neck-sized brass only. If you full-length size your belted magnums or you're prepping fresh factory brass, this New Case holder is the one you want. The deburring tool and trimmer are sold separately, so make sure you've got the rest of the Wilson setup to go with it.
This single holder covers a group of belted magnum cartridges that share the same case dimensions, including 264, 300, 338, and 358 Winchester Magnum, 308 and 358 Norma Magnum, 7mm and 8mm Remington Magnum, 458 Winchester Magnum, and 7mm STW. Wilson sizes holders by case diameter and length rather than by one caliber, which is why one holder serves the whole family. If you reload any of those belted magnums, this is the correct New Case holder.
The New Case version, which is what this one is, is made for new brass and full-length resized cases. Wilson's Fired Case holders are built for neck-sized brass only. If you full-length size your belted magnums, this New Case holder is the right match. Some oversized chambers can leave brass too large to fit a New Case holder even after sizing, in which case a Fired Case holder would be the better call.
The holder works with Wilson's trimmer for cutting brass to length, and that trimmer is sold separately. For primer pocket reaming, neck reaming, and deburring, you'll want to pair it with Wilson's Uniform Deburring Tool, also sold separately. The holder itself just secures the case; the cutting tools do the work.
The case is held by its body taper instead of the case head, which supports the brass much like a firearm chamber and keeps everything square to the cutter. Removal is simple since a light tap on the case mouth frees the brass right back out. There's no clamping or set screws to fuss with.
| UPC | 815145028211 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | NCH-264WN |
| Shipping Weight | 0.3 |
You must be logged in to post a review.
Reviews
There are no reviews yet.