$17.60
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson Case Holder in 338 Lapua Magnum is the piece that makes a Wilson trimmer setup sing. Instead of gripping the case by the head like a standard shell holder, this one cradles the case by its body taper, much like a chamber would. That full-body support is what keeps your brass perfectly aligned with the cutter so your trims come out square and repeatable, trim after trim. Machined in the USA to tight tolerances, it does exactly what a good piece of bench gear should: get out of the way and let you focus on consistent brass.
This holder is designed to pair with the Wilson Case Trimmer, and it earns its keep well beyond trimming. Drop your 338 Lapua brass in and the same holder works for primer pocket reaming, neck reaming, and deburring when you add the matching Wilson tools. Cases are pressed in and out by hand, and a quick tap on the case mouth pops them back out. A lot of folks keep a wooden dowel nearby for that step. There is no cross-pin on this standard rifle holder, so the body taper is doing all the work of holding things steady.
Wilson offers both New Case and Fired holders for many cartridges, but the 338 Lapua runs on the standard holder. Since there is no separate New Case holder cataloged for this round, this one is built to handle fired, neck-sized, new, and full-length resized brass. That makes life simple at the bench. One holder, all your 338 Lapua cases. If you happen to run an oversized chamber, brass can measure a touch larger even after sizing, which is just something worth knowing as you work through your lot of cases.
L.E. Wilson has been building trimmers and case holders since the 1930s, and the reason reloaders keep coming back is consistency. Pair this holder with their trimmer and you get the kind of uniform case length and low runout that precision 338 Lapua loads are built on.
For 338 Lapua Magnum, Wilson only catalogs this one standard holder, so it covers your bases. It is designed to work with fired, neck-sized, new, and full-length resized brass. If a separate New Case holder isn't offered for a cartridge, the standard version is all you need.
Yes, it is made to pair directly with the Wilson Case Trimmer and holds the case square for clean, repeatable trims. It also works for primer pocket reaming, neck reaming, and deburring when you add the matching Wilson tools. The trimmer and those tools are sold separately.
Instead of gripping the case head like a shell holder, this one supports the case by its body taper, similar to how a chamber holds a round. That full-body support keeps everything concentric so your trim length stays uniform. Cases press in by hand and pop back out with a quick tap on the case mouth.
A snug fit is normal and part of what keeps the case aligned. Cases are meant to be pressed in and out, and many reloaders use a wooden dowel to tap them loose. If you run an oversized chamber, brass can measure slightly larger even after sizing, so expect a firmer fit in those cases.
| UPC | 857949005241 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CH-338LA |
| Shipping Weight | 0.3 |
You must be logged in to post a review.
Reviews
There are no reviews yet.