$38.72
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson Case Gage 30-30 is one of those simple tools that earns its spot on the bench fast. It's a single piece of machined steel cut to SAAMI minimum chamber dimensions for the .30-30 Winchester, so you can see at a glance where your brass stands on both headspace and case length. Drop a fired or resized case in, lay a straightedge across the top, and you've got a quick read on whether that case needs trimming and how far your shoulder is being pushed back during sizing.
The real value here shows up when you're dialing in a full-length resizing die. Oversizing is one of the easiest mistakes to make, and it quietly shortens case life by overworking the brass at the shoulder. With the case sitting in the gage, you measure headspace with a caliper or depth micrometer, then slowly bring your sizer down until you see about a .001 to .002 drop. That gets you sizing just below your chamber's headspace, which means better fit, better consistency on paper, and brass that lasts through more loadings.
Flip the case head-down in the gage and look across the top to read minimum and maximum trim length. It measures both min and max headspace and min and max case length, giving you the two numbers that matter most during case prep. Worth noting up front: this gage does not measure body diameters, so it's purely a length and headspace reference, not a full case checker.
L.E. Wilson has been machining precision reloading tools since 1927, and the case gage design itself dates back to 1935, originally created to solve a case-separation problem. This 30-30 version carries that same reputation for tight tolerances and no-nonsense durability. The steel body with its knurled center is easy to grip, and there's nothing to wear out or go out of adjustment. It's the kind of tool you buy once and keep using for decades.
You drop a fired or resized .30-30 case into the gage, then set it on a flat surface and use a caliper, depth micrometer, or straightedge to read where the case head and case mouth sit relative to the gage. This tells you whether the case needs trimming and how your headspace compares to a minimum chamber. It's a fast visual reference during case prep and die setup.
No, this gage does not measure body diameters. It's built specifically to check case length and headspace on .30-30 Winchester brass. For body or shoulder diameter you'd need a separate tool.
Yes, and that's one of its most popular uses. Measure the headspace of a fired case in the gage, then gradually adjust your sizer until you see roughly a .001 to .002 drop in headspace. That keeps you from oversizing, which improves consistency and helps your brass last longer.
No, this is a one-piece, non-adjustable steel gage cut for the .30-30 Winchester. There's nothing to set or recalibrate, which is part of why these have a reputation for staying accurate year after year. L.E. Wilson's adjustable-style gages are intended for belted magnum cases instead.
| UPC | 857949005067 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CG-3030 |
| Shipping Weight | 0.5 |
You must be logged in to post a review.
Reviews
There are no reviews yet.