Description
If you're loading for the .284 family and want your shoulder bumps and case lengths dialed in, the L.E. Wilson Case Gage gives you a fixed reference to measure against. Drop a fired case in, check where it sits against the gage steps, and you'll know whether your brass needs trimming and how far your die is pushing the shoulder back. It's about as simple and dependable as reloading tools get.
What the .284 Winchester Case Gage Tells You
This is a one-piece, non-adjustable steel gage machined to show minimum and maximum case length along with minimum and maximum headspace. Set a case on a flat surface, slide the gage over it, and read the datum-to-head relationship against the milled steps on the ends. That reading is what keeps you from oversizing and working your brass harder than it needs to be, which is exactly what shortens case life. Pair it with a caliper or the Wilson depth micrometer and you can fine-tune your full-length sizing die with real measurements. Worth noting, the gage checks length and headspace only and does not measure body diameters.
Why the CG-284W Covers More Than One Cartridge
The .284 Winchester shares its case head and shoulder geometry with the popular 6mm-284 and 6.5-284 wildcats, so this single gage works across all three. If you're a long-range or F-Class shooter who settled on the 6.5-284 for its reach, or you run the parent .284 Win, the CG-284W has you covered without needing a separate tool for each.
Built By a Name That Started It All
L.E. Wilson has been a family-run shop since the late 1920s, and the company's founder invented the cartridge case gage back in 1935 after helping a fellow shooter chase down a case-separation problem. That heritage shows in the machining. It's a tool you buy once and use for the life of your reloading bench, and it's made in the USA. For anyone serious about consistent brass prep on the .284 line, it's hard to beat a gage this straightforward.
Key Specifications
- Manufacturer: L.E. Wilson
- Manufacturer Part Number: CG-284W
- UPC: 857949005562
- Cartridges: .284 Winchester, 6mm-284, 6.5-284
- Type: One-piece non-adjustable case gage
- Measures: Min/Max case length and Min/Max headspace
- Material: Polished steel
- Firearm Type: Rifle
- Country of Origin: United States
- Shipping Weight: 0.4 lbs
What’s Included
- L.E. Wilson Case Gage (.284 Winchester / 6mm-284 / 6.5-284)
- Instructions
- Cardboard box
Frequently Asked Questions
Does the CG-284W gage work for 6.5-284 and 6mm-284?
Yes. The .284 Winchester shares its case head and shoulder dimensions with both the 6mm-284 and 6.5-284, so this one gage covers all three cartridges. That makes it a handy single tool whether you run the parent case or either popular wildcat.
How do you use the Wilson Case Gage?
Drop a fired case into the gage, or set the case on a flat surface and slide the gage over it. The milled steps on each end show you where your case length and headspace fall between minimum and maximum. From there you know if the brass needs trimming and how your sizing die is setting the shoulder.
Is this the adjustable belted magnum version?
No. This is the standard one-piece, non-adjustable gage made for the rimless .284 family. L.E. Wilson makes a separate adjustable gage specifically for belted magnum cases, but this fixed gage is the right tool for the .284 Winchester, 6mm-284, and 6.5-284.
Does the gage measure case body diameter?
It does not. The gage is built to check overall case length and headspace from the datum to the head only. For checking body diameter or shoulder bump in finer detail, you'd pair it with a caliper or a depth micrometer.



Reviews
There are no reviews yet.