$116.16
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The 6 GT has earned its reputation as one of the most forgiving and accurate cartridges in the PRS game, and a bushing full length die is how you keep that brass performing match after match. This L.E. Wilson die resizes the case body and shoulder while letting you set neck tension to whatever your brass and bullet combo likes best. It decaps in the same pull of the handle, so your whole sizing operation happens in one step.
Instead of the fixed neck fit you get from a standard die, this one uses interchangeable bushings (sold separately) that you swap to hit your desired amount of grip on the bullet. Because the die skips the expander ball entirely, you avoid pulling the neck back open after sizing, which cuts down on brass working and stretch. The result is more consistent seating and brass that lasts longer before it needs trimming or starts showing wear. It accepts both Wilson and Redding neck bushings, so most reloaders can run bushings they already own.
Wilson builds this die from heat-treated steel held to their tight tolerances, running harder than a Grade 8 bolt with stainless parts for a long-lasting finish. It threads into any standard 7/8"-14 reloading press and includes an adjustable-depth decapping rod along with a spare decapping punch. A lock nut is part of the package too. The one thing you will need to buy separately is the sizing bushing itself, since there is no single standard size and the right one depends on your brass thickness and the neck tension you are after.
Pair it with an L.E. Wilson 6 GT case gage to verify your shoulder bump and avoid over-sizing, which is the easy way to keep headspace right and stop yourself from overworking that good 6 GT brass. For a cartridge built around precision and brass longevity, this die gives you the control to match.
No, the bushing is sold separately. There is no single standard bushing size because the correct one depends on your brass neck thickness and the neck tension you want. Measure a loaded round and subtract to find your starting size, and it is common to keep a couple of bushings on hand to fine-tune.
Yes. The Wilson 6 GT bushing die accepts both L.E. Wilson and Redding neck sizing bushings, so if you already have bushings on the shelf from another setup, there is a good chance they will drop right in.
The bushing sets your neck diameter directly as the case passes through, so there is no need to pull an expander back through the neck afterward. That means less brass working and stretch, which helps your 6 GT brass last longer and keeps neck tension more consistent from case to case.
You do not strictly need one, but it makes setup much easier and more precise. Pairing this die with an L.E. Wilson 6 GT case gage lets you verify shoulder bump and avoid over-sizing, which protects your headspace and keeps you from overworking good brass.
| UPC | 815145026545 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FLD-6GT |
| Shipping Weight | 0.6 |
You must be logged in to post a review.
Reviews
There are no reviews yet.