L.E. Wilson Bushing Full Length Sizing Die 33 XC (FLD-33XC)

Description

The 33 XC earned its reputation out past the mile mark, and getting the most out of that round comes down to brass prep you can trust. This L.E. Wilson Bushing Type Full Length Sizing Die handles the case body, shoulder, and neck in a single operation, sizing everything back to spec while letting you control neck tension through interchangeable bushings. Because tension is set by the bushing instead of an expander ball, you avoid the extra brass working that comes with traditional dies, which is a big part of why precision folks reach for this design.

What the 33 XC Full Length Die Does Differently

Swapping bushings is how you fine-tune neck tension for your specific bullet and brass combination, so you can run tighter or looser hold without buying a whole new die. The design also mimics Wilson's neck sizing dies by leaving roughly 3/16 inch at the base of the neck unsized, a trick a lot of long range reloaders find gives them more consistent results. It decaps in the same stroke thanks to an adjustable depth decapping rod, and Wilson includes an extra decapping punch in the box.

Build and Fit of the Wilson 33 XC Sizing Die

This die is machined from high quality heat treated steel, hardened to Wilson's own specs and tougher than a Grade 8 bolt, so it holds its dimensions through long loading sessions. It threads into any standard 7/8-14 reloading press, meaning it drops right into whatever single stage setup you already run. Keep in mind the neck bushing is sold separately, so you'll want to pick the right size for the neck tension you're after.

Getting the Most Out of It

Pairing this die with an L.E. Wilson case gage is the easiest way to confirm your sizing and avoid overworking your brass, which matters a lot with a big ELR case like the 33 XC. Set your shoulder bump carefully, pick your bushing, and you've got the foundation for the kind of low ES and SD numbers that put rounds on target at extreme distance.