$116.16
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson Bushing Full-Length Sizing Die for 30-06 Springfield handles the whole case in a single operation. It resizes the body and bumps the shoulder while letting you set neck tension with an interchangeable bushing, so you get a properly chambered case and the exact neck grip you're after without leaning on an expander ball. That means less brass working, longer case life, and the kind of consistency that shows up on paper.
The bushing system is the whole point here. Instead of the one-size approach of a standard full-length die, you drop in the bushing that matches the neck tension you want for your specific brass and bullet combo. Because sizing happens on the outside of the neck, you skip the expander ball that pulls a case back open and works the brass twice. Reloaders chasing accuracy tend to prefer this setup for exactly that reason, and it pairs nicely with your favorite neck lube and a good set of calipers.
L.E. Wilson has been making precision tools for a long time, and this die carries that reputation. It's machined from heat-treated steel with stainless parts for a long-lasting finish, hardened to Wilson's own specs. The die includes an adjustable-depth decapping rod plus an extra decapping punch, and it threads right into any standard 7/8-inch reloading press, so it slides into your existing setup without any fuss.
For best results, run this die alongside an L.E. Wilson case gage to check your sizing and keep from overworking the brass. Keep in mind the bushing itself is sold separately, so you'll want to pick the correct size for your target neck tension before your first session. Match it with a quality seating die and you've got a 30-06 setup capable of seriously consistent handloads.
No, the bushing is sold separately. This lets you choose the exact bushing size that gives you the neck tension you want for your particular brass and bullet. Pick one up before your first sizing session so you're ready to go.
Yes. The die threads into any standard 7/8-inch reloading press, so it works with the common single-stage and turret presses most reloaders already own. No special adapters needed.
It does not. Neck tension is set entirely by the bushing on the outside of the neck, which means the brass gets worked less and tends to last longer. The included decapping punch handles primer removal without an expander.
Pairing it with an L.E. Wilson case gage helps you verify your sizing and avoid overworking the brass. You'll also want the correct bushing for your target neck tension and a good seating die to finish your loads. A set of calipers rounds out the setup for checking your work.
| UPC | 815145025968 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FLD-3006 |
| Shipping Weight | 0.7 |
You must be logged in to post a review.
Reviews
There are no reviews yet.