Description
The stock charging handle on a reciprocating SCAR gets the job done, but it isn't winning any awards for ergonomics. That's where the Kinetic Development Group Scarging Handle comes in. This is the FDE, RCH-fit version (part SCP5-021), built to drop onto SCAR 16, 17, and 20 rifles that run a reciprocating charging handle. It fits both the 5.56 and 7.62 NATO variants, and it swaps out in seconds with no gunsmithing.
The whole point here is a better grip when you're working the bolt. The radius-faced, swept geometry gives you a wider, more positive surface to grab, which pays off when you're charging the rifle, clearing a stoppage, or locking the bolt to the rear. It's machined from low-carbon steel and wears a Flat Dark Earth finish that blends right in with the rest of your FDE build.
Set Up the Scarging Handle the Way You Shoot
Because this is the ambidextrous RCH model, you can mount it on the left or right side to match your dominant hand, and you can run it in an upward or downward sweep. Each orientation has a job. Run it swept down and it stays clear of your optic mount, so you stop raking your knuckles against the top of the rifle. That downward position also hands you extra leverage and more real estate to grab, which is nice for big hands or when you're wearing gloves.
Beating SCAR Thumb With the KDG Charging Handle
Flip the handle to an upward sweep and you get a slicker side profile. That's the setup a lot of folks use to dodge the classic SCAR Thumb, where a reciprocating handle smacks your hand during a magwell hold or an unconventional shooting position. Either way, the lower-profile shape sits closer to the receiver than the factory unit, so it snags less on gear, plates, or a sling. It's a small part that makes a noticeable difference every time you run the gun.
Key Specifications
- Manufacturer: Kinetic Development Group
- Manufacturer Part Number: SCP5-021
- Model: FN SCAR
- UPC: 851064007456
- Configuration: RCH (Reciprocating Charging Handle)
- Finish: Flat Dark Earth
- Material: Low-carbon steel
- Design: Ambidextrous, reversible up or down sweep
- Compatibility: Reciprocating FN SCAR 16, 17, 20 (5.56 and 7.62 NATO)
- Installation: Drop-in, no gunsmithing
- Country of Origin: Made in USA
What’s Included
- KDG Scarging Handle (SCP5-021, FDE)
Frequently Asked Questions
Will this KDG charging handle fit my SCAR?
This SCP5-021 is the RCH version, so it fits reciprocating charging handle SCAR 16, 17, and 20 rifles in both 5.56 and 7.62 NATO. It does not fit the non-reciprocating (NRCH) models, which use a different part. If your handle moves back and forth with the bolt when you fire, this is the one you want.
Is the Scarging Handle really ambidextrous?
Yes. You can install it on the left or right side of the receiver to match your dominant hand. On top of that, you can rotate it into an upward or downward sweep depending on whether you're prioritizing optic clearance or a slicker profile.
How does the downward sweep help with busted knuckles?
Running the handle in the downward position angles it away from the top rail, so you're not raking your hand across an optic mount every time you charge the rifle. It also gives you more grabbing surface and added leverage, which is handy for larger hands or gloved use.
Do I need any tools or a gunsmith to install it?
No gunsmith needed. The Scarging Handle is a drop-in swap that goes on in seconds. Just make sure your rifle is unloaded before you start, and pick your side and sweep orientation before you lock it down.





Reviews
There are no reviews yet.