Description
Kicks Industries built the High Flyer for hunters who want a tighter, denser pattern without getting beat up by recoil on every trigger pull. This is an extended full choke machined from 17-4 PH stainless steel, threaded to fit 12 gauge Remington-pattern barrels like the 870, 1100, and 11-87 with recessed chokes. The full constriction is where you turn when you need reach on high-flying birds or long-range cleanup shots on cripples leaving the decoys.
What Sets the High Flyer Apart
The magic is in the diagonal porting. Those outward-angled slots vent gas as the shot leaves the barrel, working like a built-in brake that Kicks rates at roughly a 25% reduction in felt recoil along with noticeably less muzzle jump. Get back on target faster and your follow-up shot lands where you want it. Inside, the conical/parallel design squeezes the shot column down gradually to cut down on flyers and lift pattern density by up to 20% over a factory tube.
Dialing In Your Loads
Kicks labels the High Flyer based on how it patterns with steel and other non-toxic shot, though it handles lead just fine too. Waterfowl hunters running #2 and #3 steel tend to see the best results, and plenty of duck and goose guys report this tube outpatterning their old factory chokes and even some pricier aftermarket options. It is a solid pick for pass-shooting ducks, chasing distant geese, or reaching out on dove and upland birds. Since every barrel and load combo behaves a little differently, spend an afternoon at the patterning board with a couple of shell brands to find the one your gun likes best.
Installation and Upkeep
The High Flyer threads in with your fingers, no wrench needed to get it started. A final snug with a choke wrench is smart so it does not back out while you shoot. The stainless build shrugs off the wet, muddy conditions waterfowlers deal with, and the extended body makes it easy to grab and swap out in the field. Ported chokes do collect a little more fouling, so give it a quick clean after a hard hunt and it will keep printing tight for years.
Key Specifications
- Manufacturer: Kicks Industries
- Manufacturer Part Number: REM12GAH.F.FULL
- UPC: 821041052717
- Gauge: 12 Gauge
- Constriction: Full
- Thread Pattern: Remington Rem Choke
- Style: Extended, Diagonally Ported
- Internal Design: Conical/Parallel
- Material: 17-4 PH Stainless Steel
- Overall Length: Approx. 3 9/16 in
- Ported Section Length: 1 1/2 in
- In-Barrel Length: 2 1/16 in
- Standard Bore Size: .730 in
- Recoil Reduction: Up to 25%
- Pattern Improvement: Up to 20%
What’s Included
- Kicks High Flyer extended full choke tube (12 gauge, Remington thread)
Frequently Asked Questions
What shotguns does the High Flyer Remington choke fit?
This tube is threaded for 12 gauge barrels that use the Remington Rem Choke pattern, which covers popular guns with recessed chokes like the 870, 1100, and 11-87. If your shotgun uses ProBore or TruChoke threads, you will need a different Kicks model, so compare your existing choke to the specs before ordering. When in doubt, measure your current tube or check your owner's manual for the thread type.
Can I shoot steel shot through the High Flyer full choke?
Yes, the High Flyer is designed with steel and other non-toxic shot in mind, and Kicks actually labels its constrictions based on how they pattern with steel. It handles lead just as well for upland and dove hunting. Keep in mind a full choke with larger steel like #2 can pattern very tight, so a little time at the patterning board will help you match the right shot size.
Does the ported design really cut down on recoil?
The diagonal ports vent gas as the shot exits, working like a muzzle brake that Kicks rates at around a 25% reduction in felt recoil. Beyond softening the kick, it also tames muzzle jump, which is what gets you back on target faster for follow-up shots. That combination is a big reason waterfowl hunters like it during long days in the blind.
Do I need any tools to install the High Flyer choke?
You can thread it in by hand thanks to the extended body, so no special wrench is required to get started. Kicks does recommend a final snug with a choke tube wrench so it does not loosen up during shooting. Ported tubes pick up a bit more fouling, so a quick clean after a hard hunt keeps it performing.




Reviews
There are no reviews yet.