$1,195.00
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Weight matters when you are climbing a ridge at first light, and that is exactly the problem KGM set out to solve with the Pursuit series. The Pursuit P6 is a 6mm-bore suppressor machined from Grade 5 and Grade 9 titanium, sized at a trim 1.75 inch diameter and finished in a low-key gray that will not stick out on a mountain rifle. It is built around cartridges like 6mm Creedmoor, 6mm ARC, and .243 Winchester, and it carries a magnum rating within KGM's defined barrel lengths, so hot 6mm loads are fair game on an appropriate setup.
KGM cuts the bore with a wire-EDM process, which keeps everything perfectly concentric and aligned from the mount to the end cap. The included Ultra-Light Taper Mount (ULTM) is an all-titanium muzzle brake in 5/8×24 that needs no shims and no timing. You torque it on, the taper interface seals the gases internally, and the can returns to the same spot every time you spin it off and back on. That repeatability is the whole point for a hunting or precision rig, since a suppressor that wanders your zero is worse than no suppressor at all.
The internal baffle stack manages gas flow away from the bullet's path, which protects accuracy while cutting sound, flash, and recoil to levels you would expect from a noticeably larger can. A shrouded, vented end cap lets gas exit evenly and consistently, smoothing out the recoil impulse and taming blowback so you are not eating gas at the bench. Flash reduction gets a boost from the internal gas redirection too, which is a nice touch for low-light hunts.
This one belongs on a lightweight 6mm hunting rifle or a walk-around predator gun where every ounce on the muzzle changes how the rifle balances and carries. If you have been holding off on suppressing a featherweight barrel because most cans feel like a brick on the end of it, the Pursuit P6 is the answer KGM built for you.
The Pursuit P6 has a 6mm bore, so it covers 6mm and smaller centerfire rifle cartridges like 6mm Creedmoor, 6mm ARC, .243 Winchester, and .223 Remington. KGM rates the Pursuit series for magnum-class loads within their defined minimum barrel lengths, so check your barrel length against KGM's guidelines for hotter cartridges. If you want one can to also cover 6.5mm or .30 caliber rifles, look at the P65 or P30 versions instead.
The 5/8×24 Ultra-Light Taper Mount muzzle brake comes in the box, so you are ready to go on most 6mm rifle barrels. It is an all-titanium brake that installs without shims or timing, which makes setup about as painless as it gets. KGM also offers the ULTM in 1/2×28 and 9/16×24 if you want to set up additional rifles.
This is one of the P6's strong suits. The taper interface on the ULTM mount gives you repeatable, concentric alignment every time you reattach the can, and the wire-EDM cut bore keeps everything perfectly true. Expect minimal point of impact shift and a zero that holds between removal and reinstallation.
That is exactly what it was designed for. The whole Pursuit series is built from Grade 5 and Grade 9 titanium to deliver sound and recoil reduction comparable to bigger cans in the lightest package KGM could manage. On a featherweight 6mm rifle it adds suppression without wrecking the balance or the carry weight.
| UPC | 784668807446 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | PT-P6-ULTM-GRY |
| Caliber/Gauge | 6MM |
| Color | Gray |
| Model | |
| Product Type | Suppressor |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.