$1,195.00
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
KGM built the Pursuit series around a simple idea: give hunters and backcountry rifle guys everything they need in a can and nothing they don't. This version runs a dedicated 6mm bore, which is the smart play if your rifle lives in the 6mm world. A tighter bore keeps more gas working inside the suppressor instead of leaking around the bullet, so you get noticeably better sound performance out of the same size package compared to running a .30 cal can on your 6 Creedmoor or 6mm ARC.
The P30 Pursuit is machined from Grade 5 and Grade 9 titanium, keeping weight down where it matters most, out at the end of your barrel. Despite the light build, it carries a magnum rating within KGM's barrel length guidelines, so it's not a fragile range-day toy. The bore is cut with a wire EDM process for dead-nuts concentricity, and KGM's gas flow design works to keep your point of impact consistent and your zero where you left it. A shrouded, vented end cap bleeds gas off evenly, which smooths out the recoil impulse and knocks down flash. The FDE Cerakote finish blends in nicely on a hunting rig and won't shine you out in the field.
Mounting is handled by KGM's Ultra-Light Taper Mount, an all-titanium muzzle brake with a 5/8×24 thread pitch that installs without shims or timing. The taper interface seals gas internally and gives you repeatable, concentric lockup every time you spin the can on, which is exactly what you want for consistent zero retention. At 1.75 inches in diameter, it keeps a slim profile over your barrel and plays well with most scope setups. If you shoot a 6mm and want a can that disappears on the rifle until you pull the trigger, this one belongs on your short list.
No, this version has a dedicated 6mm bore, so it's limited to 6mm and smaller projectiles. That tight bore is the whole point, since it delivers better suppression on cartridges like 6mm ARC, 6 Creedmoor, 6 GT, and .243 Win. If you want to run bigger calibers, KGM offers the Pursuit in 6.5mm and .30 cal bores.
Yes, it ships with KGM's all-titanium Ultra-Light Taper Mount brake in 5/8×24. The taper mount needs no shims or timing, just thread it on and torque it down. The taper interface gives repeatable, concentric lockup so your zero stays put when you take the can on and off.
It is, within KGM's published barrel length guidelines for the series. The Grade 5 and Grade 9 titanium construction handles hard-hitting 6mm rounds while staying light enough for a mountain rifle. Just check KGM's minimum barrel length chart for your specific cartridge before running the hottest loads.
KGM cuts the bore with a wire EDM process for precise alignment and concentricity, and their gas flow design is built to minimize point of impact shift. The shrouded, vented end cap releases gas evenly, which helps both accuracy and recoil feel. Expect a small, repeatable POI shift like any can, but it should hold consistent shot to shot.
| UPC | 784668807453 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | PT-P6-ULTM-FDE |
| Caliber/Gauge | 6MM |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.