$250.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Big bore rifles are a blast to shoot right up until the recoil starts wearing on you, and that is exactly where a well designed brake earns its keep. The KGM Technologies R50T Taper Muzzle Brake pulls double duty. On its own, it tames the push of heavy hitters like the .50 BMG. Mounted on a rifle you plan to suppress, it becomes the taper-lock interface for KGM's R50T suppressor, so you can run braked or suppressed without swapping muzzle devices every trip to the range.
A lot of quick attach systems rely on ratchets, latches, or fine threads that collect carbon and loosen over time. KGM went with a tapered mating surface instead. When the suppressor tightens down on the taper, it centers itself on the bore and locks up solid with metal on metal contact. That means consistent alignment shot after shot, better repeatability for your zero, and less wear on the mount over the long haul. It is a simple approach that holds up well under the punishment big bore cartridges dish out.
This version, part number A-TMB50-S-4, is cut with M25x1.5 threads, which covers a number of metric-threaded .50 caliber and large bore rifles, particularly European-pattern barrels. KGM machines these brakes from steel and treats them with black nitride, a finish that hardens the surface, resists corrosion, and shrugs off the heat and blast that live at the muzzle of a fifty. If your barrel wears a different thread pitch, KGM offers the same brake in several other patterns, including 1×14, 7/8×14, and M24x1, so double check your muzzle threads before ordering.
Whether you are setting up for the R50T can or just want serious recoil reduction on a metric-threaded big bore, this brake is a solid piece of the puzzle.
This brake is the dedicated taper-lock mount for the KGM R50T big bore suppressor, which handles .50 BMG, .416 Barrett, and .408/.375 CheyTac. The tapered mating surface self-centers the can on the bore and locks up tight for repeatable alignment. It pairs with the R50T specifically, not KGM's smaller caliber cans.
Yes. It works as a standalone muzzle brake and does a solid job knocking down recoil on heavy caliber rifles. The taper mount is just there whenever you decide to add the R50T suppressor down the road.
M25x1.5 shows up on a number of metric-threaded big bore rifles, especially European-pattern .50 caliber barrels. Measure or check your barrel's thread spec before ordering, since KGM also makes this brake in 1×14, 7/8×14, and M24x1 if your muzzle is cut differently.
Black nitride is one of the better treatments for a muzzle device because it hardens the steel surface itself rather than sitting on top like paint. It resists corrosion, carbon buildup, and the intense heat and blast at the muzzle of a big bore rifle. Cleanup is easier too, since fouling does not bite into the surface as much.
| UPC | 784668807187 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | A-TMB50-S-4 |
| Model | |
| Thread Pattern | M25x1.5 |
You must be logged in to post a review.
Reviews
There are no reviews yet.