$250.00
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The R50T suppressor ships from KGM with a 1×14 muzzle device, which covers a good chunk of the popular .50 BMG rifles out there. But plenty of big bore barrels wear 7/8×14 threads instead, and that is exactly where this brake comes in. The A-TMB50-S-2 gives your R50T a proper home on that rifle, whether you are setting up a second host or fitting the can to the gun you already own.
The tapered interface is the heart of this system. As the suppressor spins down onto the brake, the mating tapers wedge together and self-center, so the can returns to the same position every time you mount it. That means consistent point of impact between range sessions and no worrying about the suppressor walking loose under the kind of recoil and gas volume a .50 BMG produces. KGM built its whole taper mount line around this idea, and it pays off most on big cartridges where mounting stress is at its worst.
This is machined steel with a black nitride treatment, which hardens the surface and adds serious corrosion and heat resistance without a coating that can chip or burn off. Nitride is a smart choice for a part that lives at the muzzle of a .50, where flame cutting and carbon buildup eat lesser finishes alive. And since it works as a true muzzle brake on its own, it still tames recoil when you are running the rifle without the can attached.
If you are splitting one R50T between multiple rifles, dedicated brakes like this one are the way to do it. Leave a mount torqued on each host, then move the suppressor between them in seconds with a repeatable lockup on every gun. Verify your barrel is threaded 7/8×14 before ordering, follow KGM's mounting instructions for install, and you are set for a long service life out of both the brake and the can.
Yes, the R50T ships from KGM with one taper muzzle brake threaded 1×14, which fits many popular .50 BMG rifles. This 7/8×14 version is for barrels with the smaller thread pattern, or for keeping a dedicated mount on a second rifle so you can swap the suppressor between guns quickly.
It is purpose-built for KGM's taper mount system, so it pairs with the R50T. Other brands' cans use their own mounting interfaces and will not lock up on this brake. If you run a different suppressor, grab the mount made for that system instead.
Absolutely. The A-TMB50-S-2 is a functional muzzle brake on its own, so it cuts recoil on your .50 whether or not the can is mounted. The taper surfaces just sit ready for the suppressor whenever you want to spin it on.
The tapered surfaces wedge together and self-center as the suppressor tightens down, which keeps everything concentric with the bore and resists loosening under heavy recoil. That translates to consistent point of impact and longer service life for both the mount and the suppressor, which matters a lot on a cartridge as stout as .50 BMG.
| UPC | 784668807163 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | A-TMB50-S-2 |
| Model | |
| Thread Pattern | 7/8"x14 |
You must be logged in to post a review.
Reviews
There are no reviews yet.