$950.00
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Hanging a full-size can off the end of a precision rifle changes how the whole gun handles, and that's exactly the problem the KGM R65K was built to solve. This is the short version of KGM's 6.5mm-specific R65, trimmed down to 5.8 inches and just 10 ounces of laser-welded titanium. Because the bore is sized for 6.5mm rather than .30 caliber, it squeezes out several extra decibels of reduction on cartridges like 6.5 Creedmoor and 6.5 PRC compared to running an oversized can on the same rifle.
KGM's whole design philosophy centers on gas flow, and the R65K shows it. The shorter profile moves expanding gas through the baffle stack quickly, which cuts recoil and keeps back pressure down on semi-auto rifles, so your gas gun stays cleaner and cycles smoother. The Adjustable Port End Cap (APEC) is the standout feature here. You can close individual ports to steer muzzle movement during recoil, or leave them open to prioritize sound reduction. Being able to tune the can to your specific rifle and load is something you rarely get at this size. Internally, gas is directed away from the bullet's flight path, which is a big part of why these cans have a reputation for minimal point of impact shift.
The rear of the can is threaded 1.375×24, the industry standard HUB pattern, so you can run just about any HUB-compatible mount on the market. Out of the box it ships with a titanium 5/8×24 direct thread mount, which covers the most common muzzle thread on 6.5mm rifles and keeps the whole setup as light as possible.
The machined titanium construction is laser welded and rated for tens of thousands of rounds, and the Sniper Gray C-Series Cerakote finish shrugs off field wear while keeping the visual signature subdued. Whether you're chasing steel at distance, hunting with a lightweight bolt gun, or running a precision gas rifle, the R65K keeps the weight penalty small and the performance high. Made in the USA.
Yes. The R65K uses the industry standard 1.375×24 HUB thread pattern at the rear, so you can swap the included 5/8×24 titanium direct thread mount for just about any HUB-compatible mount, including quick-detach systems from other manufacturers. That flexibility makes it easy to move the can between rifles with different muzzle devices.
APEC stands for Adjustable Port End Cap, and it lets you open or close individual ports on the front of the suppressor. Closing ports lets you tune how gas exits to help control muzzle movement under recoil, while leaving them open maximizes sound reduction. It's a rare feature on a can this compact and lets you dial the R65K in for your specific rifle and load.
It runs well on both. The short baffle stack moves gas through the can quickly, which reduces back pressure, and that means less gas blowing back into the action of a semi-auto. Combined with the APEC tuning, it's a solid pick for precision gas guns as well as lightweight bolt rifles.
The two cans share the same 5.8 inch length, 10 ounce weight, and titanium construction, but the R65K has a dedicated 6.5mm bore while the R30K is opened up for .30 caliber. The tighter bore gives the R65K several additional decibels of sound reduction on 6.5 caliber rifles. If you only shoot 6.5mm and smaller, the R65K is the better performer; if you need .30 cal flexibility, go with the R30K.
| UPC | 810042344952 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RT-R65K-HUB-GRY |
| Thread Pattern | 5/8"x24 |
| Caliber/Gauge | 6.5MM |
| Color | Gray |
| Model | |
| Product Type | Suppressor |
You must be logged in to post a review.
Reviews
There are no reviews yet.