0
0

KAK Industry Retro Extended Flash Hider 6″ 1/2×28 .223/5.56 Black

UPC: 811163035873

$28.49

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There's something about the long, stepped silhouette of an old CAR-15 Commando that never gets old, and KAK Industry nailed it with this Retro Extended Flash Hider. Modeled after the XM-177 moderator that defined the look of Vietnam-era carbines, this piece brings that distinctive extended profile to modern AR-15 builds. It's machined in-house from bar steel, heat treated for strength, and finished in a corrosion-resistant phosphate coating that gives it that correct, no-nonsense military appearance.

What Makes the Retro Extended Flash Hider Tick

The design follows the classic pattern with five ports cut into the top and sides and a sealed bottom, similar to an A2 layout, which helps direct gas and noise forward and away from you. It measures 6.15 inches overall and weighs right around 9.7 ounces, so it's got some heft up front, which is exactly what you'd expect from a solid steel muzzle device built like the originals. The threading is a standard 1/2×28 pattern, so it drops onto most 5.56 and .223 barrels without any fuss, and the bore is sized to work with both 5.56 and 9mm hosts.

Built for Retro and Clone Builds

This one's a favorite for folks building period-correct XM177, GAU-5, and Colt Commando clones, or anyone who just wants that retro carbine attitude on a modern rifle. When properly pinned and welded to a 10.5-inch barrel, it adds roughly 5.56 inches to the overall length, bringing short barrels up to a full rifle length. It comes pre-drilled with a .125-inch hole for pin and weld work, and the milled wrench flats make hand installation simple with a 3/4-inch wrench.

A Few Install Notes

Keep in mind a crush washer is not included, so grab one separately if you're timing it or want a clean shoulder up front. The phosphate finish blends nicely with most black rifle setups and stands up well to range use over time. Simple, tough, and full of old-school character, this is a great pick for anyone chasing that classic look.

Key Specifications

  • Manufacturer: KAK Industry
  • Model: Retro Extended Flash Hider
  • Manufacturer Part Number: AR15-MD-FH-001
  • UPC: 811163035873
  • Product Type: Flash Hider
  • Caliber/Gauge: .223 Rem/5.56 NATO
  • Thread Pitch: 1/2×28
  • Overall Length: 6.15 inches
  • Weight: 9.7 oz
  • Material: Bar Steel, Heat Treated
  • Finish: Phosphate
  • Color: Black
  • Ports: 5 (top and sides, sealed bottom)
  • Pin and Weld: .125 inch pre-drilled hole
  • Wrench Flats: Yes, 3/4 inch
  • Inspired By: XM-177 Moderator

What’s Included

  • KAK Industry Retro Extended Flash Hider

Frequently Asked Questions

Does the Retro Extended Flash Hider come with a crush washer?

No, a crush washer is not included in the package. You'll want to pick one up separately if you plan to time the device or want a clean shoulder against the barrel. Any standard 1/2×28 crush washer will do the job.

What barrel length works best with this KAK flash hider?

It's a popular choice for 10.5-inch barrels, where pinning and welding it adds roughly 5.56 inches to reach a full rifle length. That said, it threads onto any standard 1/2×28 muzzle, so you can run it on longer barrels purely for the retro look and forward blast direction.

Will this Retro Extended Flash Hider fit my .223/5.56 AR-15?

Yes, it uses the standard 1/2×28 thread pattern found on most .223 and 5.56 AR-15 barrels, so installation is straightforward. The bore is also sized to work with both 5.56 and 9mm hosts. Milled wrench flats let you snug it down with a 3/4-inch wrench.

Is this a suppressor since it's based on the XM-177 moderator?

No, it is not a suppressor. The original moderator was an extended flash and blast device that gave the XM-177 its signature profile, and this KAK version is a muzzle device that directs gas and noise forward while delivering that classic look. It doesn't reduce the sound signature the way a modern can would.

Additional information

UPC

811163035873

Manufacturer

Manufacturer Part Number

AR15-MD-FH-001

Caliber/Gauge

.223 REM/5.56 NATO

Color

Black

Model

Product Type

Flash Hider

Reviews

There are no reviews yet.

Be the first to review “KAK Industry Retro Extended Flash Hider 6″ 1/2×28 .223/5.56 Black”