$185.25
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Running a suppressor on a shotgun used to mean threading barrels or living with clunky adapters. JK Armament took a smarter route with the Bald Eagle 195. This Choke Replacement Muzzle Device (CRMD) threads into your Beretta Optima HP choke system just like a standard tube, sitting flush with the muzzle while giving you a gas-sealing quick-detach mount for JK's 195 series 12 gauge suppressors and the 195 LT Super Comp. Pull your factory choke, spin this in, and your A400, A300, 1301 Comp, or TX4 is ready for a can without touching the barrel itself.
Shotgun muzzles take a beating from hot gas, plastic wad fouling, and weather, so JK machined the Bald Eagle from 17-4 stainless steel and coated it in DLC for wear and corrosion resistance. The bore is cylinder, which makes sense once you understand the system: with JK's 195 suppressors, pattern restriction is handled by the interchangeable Choke Cap on the suppressor's end cap. That means the CRMD stays installed in your barrel while you swap chokes at the front of the can in seconds, no special tools needed. It is a clean setup that saves you from constantly wrenching on choke tubes between stands.
This version is cut specifically for the Beretta Optima HP choke pattern, which covers popular semi-autos like the A400 Xplor, A400 Xtreme, A400 Xcel, A300, 1301 Comp, and TX4. Users report it seating perfectly flush with the barrel and holding tight through field use, including waterfowl hunts with a 195 series can mounted up. A light coat of anti-seize on the threads before install is cheap insurance, same as any choke tube.
Even if a suppressor is not in the picture yet, the Bald Eagle 195 works as a stand-alone muzzle device, so you can set your shotgun up now and add the can later. For anyone building toward a suppressed 12 gauge on a Beretta platform, this is the piece that ties the whole system together.
This version is machined for the Beretta Optima HP choke system, which covers guns like the A400 Xplor, A400 Xtreme, A400 Xcel, A300, 1301 Comp, and TX4. If your barrel takes Optima HP chokes, this will thread right in. JK makes other Bald Eagle variants for Benelli, Browning, Mossberg, and other choke patterns, so double check your choke system before ordering.
No. It works as a stand-alone muzzle device, so you can install it now and add a JK 195 series suppressor or the 195 LT Super Comp down the road. It sits flush with the muzzle and does not change your shotgun's handling in the meantime.
The CRMD itself is cylinder bore. When running a JK 195 series suppressor, the pattern constriction is handled by the interchangeable Choke Cap on the front of the can, which swaps out in seconds without special tools. That lets you leave the muzzle device installed permanently and change chokes at the suppressor instead.
It installs exactly like a choke tube. Remove your factory Optima HP choke, thread the Bald Eagle in until it seats flush with the barrel, and you are done. Many folks add a dab of anti-seize to the threads first, which is smart practice with any choke that lives in the barrel long term.
| UPC | 850038425715 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | JKMDHDBE12BOHP |
| Caliber/Gauge | 12 Gauge |
| Color | Black |
| Model | |
| Product Type | Choke |
You must be logged in to post a review.
Reviews
There are no reviews yet.