$109.25
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A good muzzle device should do more than one job, and the JK Armament Bald Eagle Compensator pulls double duty better than most. On its own, it knocks down recoil and flash on your 9mm host. Pair it with a JK Quick Attach Taper Mount equipped suppressor, like the 155 PCX 9, and it becomes your QD mounting point, seating inside the can where it works as the initial blast baffle. That means the comp takes the brunt of the muzzle blast instead of your suppressor's internals, which stretches the service life of your can over thousands of rounds.
The symmetrical port design is the detail that installers appreciate most. There's no timing, no shims, no peel washers, no fiddling to get ports clocked at the right position. Thread it on, torque it to the recommended 35 ft/lbs, and you're done. JK machined wrench flats into both ends, 3/4 inch at the rear and 13/16 inch up front, so getting a wrench on it is never a struggle whether you're installing or pulling it off for cleaning.
This isn't a soft aluminum comp that erodes after a few range trips. The Bald Eagle is machined from heat-treated 17-4 stainless steel and treated with a black nitride finish for hardness and corrosion resistance. At just 1.65 inches overall, it only adds about an inch to your barrel once installed, keeping your PCC or 9mm carbine handy and balanced.
This version is bored for 9mm and threaded 1/2×28, which covers most pistol caliber carbines and 9mm AR builds. If you're running a JK 155 series suppressor or planning to pick one up, this comp is the natural companion piece. And on days you'd rather run unsuppressed, it holds its own as a solid standalone compensator that keeps your muzzle flat during fast strings.
No, and that's one of its best features. The port design is fully symmetrical, so there's no correct clock position to chase. Just thread it on and torque it to the recommended 35 ft/lbs using the built-in wrench flats. No shims or peel washers needed.
It serves as the quick-attach mounting point for suppressors running the JK Quick Attach Taper Mount system, including the JK 155 series cans like the 155 PCX 9, 155 RCX 30, and 155 SBRX 30. For this 9mm version, the 155 PCX 9 is the natural pairing. It won't interface with QD systems from other suppressor brands.
Absolutely. It works as a regular compensator on its own, reducing felt recoil and flash on your 9mm host. The quick-attach capability is there when you want it, but you don't need a suppressor to get value out of this muzzle device.
If your barrel is threaded 1/2×28, which is the most common thread pitch for 9mm ARs and PCCs, this version will fit. At 1.65 inches long, it only adds about an inch to your barrel once threaded on, so it keeps a compact setup compact. JK also offers the Bald Eagle in other thread and bore sizes if your barrel is threaded differently.
| UPC | 850038425838 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | JKMDHDBE928 |
| Model | |
| Thread Pattern | 1/2"x28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.