0
0

JK Armament HD Direct Thread Mount .578×28 HUB 1.375×24 Black

UPC: 850017729636

$99.75

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Direct thread is still the simplest way to hang a suppressor on a gun, and the JK Armament HD Direct Thread Mount keeps it that way. This version is cut for .578×28 muzzle threads, the standard pitch you'll find on most threaded .45 ACP barrels and a fair number of 10mm setups. On the suppressor side it carries the industry standard HUB 1.375×24 thread, so it threads right into any JK 155 series can along with the long list of suppressors from other makers that share the HUB pattern. If your can takes HUB mounts, this one drops in.

Built From 17-4 Stainless, Not Cut Corners

JK machines this mount from heat treated 17-4 stainless steel, which is exactly what you want in a part that lives at the muzzle and soaks up heat, carbon, and torque cycles. The Cerakote black finish keeps it looking right next to a black can and adds a layer of protection against the crud that builds up on any suppressor mount. It's a simple part done well, and that matters more here than anywhere else on your setup.

Installation the JK HD Thread Mount Gets Right

A lot of thread mounts are a pain to torque properly. This one has 1.5 inch wrench flats on the outside and a 3/4 inch socket drive on the inside, so you can seat it into the suppressor with real tools instead of strap wrenches and hope. That same design makes removal easy when it's time to clean or swap mounts, even after a long range day has baked everything together.

One Mount, a Lot of Guns

Because the HUB pattern has become the common language of the suppressor world, this mount isn't locked to one brand. Pair it with a JK 155, or use it to give a HUB compatible can from another manufacturer a dedicated home on your .45 pistol caliber carbine, threaded bolt gun, or big bore pistol host. Grab one for each barrel and swapping the can takes seconds.

Key Specifications

  • Manufacturer: JK Armament
  • Model: 155 HD Direct Thread Mount
  • Manufacturer Part Number: JK155HDM57828
  • UPC: 850017729636
  • Muzzle Thread Pitch: .578×28 TPI
  • Suppressor Thread Pitch: HUB 1.375×24 TPI (1-3/8×24)
  • Material: Heat Treated 17-4 Stainless Steel
  • Finish: Cerakote Black
  • External Wrench Flats: 1.5 in
  • Internal Socket Drive: 3/4 in
  • Compatibility: JK 155 series and other HUB (1.375×24) suppressors
  • Made In: USA

What’s Included

  • JK Armament HD Direct Thread Mount .578×28

Frequently Asked Questions

Will the JK Armament HD Direct Thread Mount work with suppressors from other brands?

Yes, as long as the suppressor uses the industry standard HUB 1.375×24 thread pattern. That covers the entire JK 155 series plus a long list of cans from other manufacturers that have adopted HUB mounting. Just confirm your can is HUB compatible before ordering.

What guns is the .578×28 thread pitch meant for?

.578×28 is the standard thread pitch on most threaded .45 ACP barrels and shows up on plenty of 10mm barrels too. If you're running a threaded 1911, Glock 21, or a .45 pistol caliber carbine, odds are good this is the pitch you need. Always double check your barrel's thread spec before buying any mount.

Do I need special tools to install the JK HD Thread Mount?

Nothing exotic. The mount has 1.5 inch external wrench flats and a 3/4 inch internal socket drive, so a standard wrench or socket handles installation and removal. That internal drive is a nice touch since it lets you torque the mount into the suppressor properly without marring the finish.

Can I use this mount on a semi-auto pistol with a tilting barrel?

Be careful here. Most semi-auto centerfire pistols with Browning-style tilting barrels need a booster (Nielsen device) to cycle reliably with a suppressor attached, and this is a fixed direct thread mount. It's best suited for fixed barrel hosts like pistol caliber carbines. For a tilting barrel pistol, look at JK's HUB Piston Mount with a .578×28 piston instead.

Additional information

UPC

850017729636

Manufacturer

Manufacturer Part Number

JK155HDM57828

Model

Reviews

There are no reviews yet.

Be the first to review “JK Armament HD Direct Thread Mount .578×28 HUB 1.375×24 Black”