Description
The Jeb's High Voltage .690 is a ported waterfowl choke built for the Browning A5 running the Invector-DS system. It's designed to shorten and tighten the shot string so you get a denser, more consistent pattern downrange, which is exactly what you want when ducks and geese are working the outer edge of your effective range. This tube handles steel, lead, bismuth, or just about any shot you want to run through it, so you're not stuck matching one choke to one load.
What Sets the High Voltage .690 Apart
Every tube in the High Voltage line is machined from 17-4 stainless and heat treated to around 44 on the Rockwell scale, which is what lets it stand up to steel and tungsten loads without chewing itself up. The .690 constriction lands in Jeb's long-range territory, comparable to a factory modified in feel but tuned to throw the kind of tight, even patterns their chokes are known for. Waterfowlers running the A5 with .690 and hard-hitting steel or bismuth loads tend to rave about how clean and killer the patterns come out at distance.
Porting and Fit on the Browning A5
The ports up top help bleed off gas and take a little of the muzzle jump out of the equation, which is a nice touch on heavy waterfowl loads. Just make sure your barrel is stamped Invector-DS before ordering. The A5 uses Browning's double-seal DS system with a brass ring at the base, and it will not swap with Standard Invector or Invector-Plus tubes, so matching the thread pattern is the one box you have to check.
Real-World Range and Loads
The High Voltage series is built to reach, with the extended ported design giving you usable pattern density out toward the 50 to 60 yard mark depending on your load. Pair it with quality steel #2s or #3s, or step into bismuth and tungsten when you want more downrange punch. It's a straightforward upgrade over factory tubes for hunters who want to squeeze every bit of reach out of their A5.
Key Specifications
- Manufacturer: Jebs Choke Tubes
- Manufacturer Part Number: JPC-12I2/685
- UPC: 643906924119
- Series: High Voltage Waterfowl
- Gauge: 12 Gauge
- Fit / Choke System: Browning A5 Invector-DS
- Constriction: .690
- Porting: Ported
- Material: 17-4 Stainless Steel
- Hardness: 44 Rockwell
- Shot Compatibility: Steel, Lead, Bismuth, Tungsten
- Finish: Matte
- Country of Origin: Made in USA
- Shipping Weight: 0.22 lb
What’s Included
- One Jeb's High Voltage Ported Choke Tube (12 ga, Browning A5 Invector-DS, .690)
Frequently Asked Questions
Will the Jeb's High Voltage .690 fit my Browning A5?
This tube is cut for the Browning A5 Invector-DS choke system, so check that your barrel is stamped Invector-DS before ordering. The DS system uses a brass double-seal ring and different threading, so it won't swap with Standard Invector or Invector-Plus tubes. If your A5 barrel says Invector-DS, you're good to go.
What shot can I run through the High Voltage choke tube?
It's built to handle steel, lead, bismuth, and tungsten without issue. The 17-4 stainless body heat treated to around 44 Rockwell is what makes it tough enough for hard steel and TSS loads. That flexibility means you can match your load to the hunt without changing tubes.
How far will the .690 constriction reach on waterfowl?
The .690 sits in Jeb's long-range range and pairs well with an extended, ported design meant to stretch your effective distance. With good steel or bismuth loads, hunters report clean, dense patterns out toward the 50 to 60 yard mark. It's a solid choice for those days when the birds won't quite commit.
Does the porting actually help?
The ports bleed off gas at the muzzle, which takes a little of the jump and muzzle rise out of heavy waterfowl loads. It's a small but appreciated benefit when you're shooting stout steel or tungsten shells. Pattern performance is still the main draw, but the ports are a nice bonus for follow-up shots.




Reviews
There are no reviews yet.