Description
The JEBS Head Hunter is one of those chokes that earns its reputation the moment you print your first pattern. Machined for the Browning A5 Invector-DS system in a .660 constriction, this ported turkey tube is designed to wring tighter, more even patterns out of your 12 gauge and stretch your effective range well past what a factory full choke can do. JEBS built its name in the turkey world, and the Head Hunter line set a record at the NWTF Still-Target Championships back in 2017, putting 35 pellets in a 3-inch circle at 40 yards before commercial TSS loads were even a thing.
What Makes the Head Hunter Pattern So Well
The secret is the patented multi-staged interior bore. Instead of one abrupt constriction, the bore steps down in stages to help peel the wad cup away from the shot column cleanly. That separation is what gives you those dense, well-distributed cores turkey hunters chase. The porting up front bleeds off gas before the shot fully clears the muzzle, and plenty of folks like the barrel-extension look it adds to the gun too.
Built From 17-4 Stainless for Any Shot You Feed It
Every Head Hunter tube is machined from 17-4 stainless steel and heat treated to around 44 Rockwell, so it holds up to lead, steel, HEVI-Shot, tungsten and TSS without complaint. That versatility matters, because the right choke and load pairing is everything in the turkey woods. The .660 constriction tends to play especially nice with lead and heavier shot, though it still throws respectable patterns with premium tungsten loads.
Dialing In Your A5 for the Turkey Woods
No two guns pattern exactly alike, so plan on spending a little range time testing loads before opening day. JEBS is known for helpful customer service if you want a load recommendation for your specific setup. Proudly made in the USA, this is the kind of tube a lot of hunters screw in once and never take back out.
Key Specifications
- Manufacturer: JEBS Choke Tubes
- Model: Head Hunter Turkey
- Manufacturer Part Number: JPC-12I1/660
- UPC: 643906923679
- Gauge: 12 Gauge
- Fits: Browning A5 Invector-DS
- Constriction / Exit Diameter: .660
- Porting: Ported
- Finish: Matte Stainless
- Material: 17-4 Stainless Steel
- Hardness: Heat treated to approx. 44 Rockwell
- Shot Compatibility: Lead, Steel, HEVI-Shot, Tungsten, TSS
- Application: Turkey
- Country of Origin: Made in USA
- Shipping Weight: 0.22 lb
What’s Included
- 1 JEBS Head Hunter Ported Turkey Choke Tube (12ga Browning A5 Invector-DS, .660)
Frequently Asked Questions
Will the JEBS Head Hunter .660 fit my Browning A5?
This tube is machined specifically for the Browning A5 Invector-DS choke system in 12 gauge. It will not fit older Invector or Invector-Plus threading, so double check that your A5 uses the DS system before ordering. If you are unsure, the markings on your factory choke or your owner's manual will confirm the pattern.
What loads work best with the .660 constriction Head Hunter?
The .660 is a versatile constriction that runs well with lead, HEVI-Shot and heavier shot, and it still throws solid patterns with premium TSS. As a general rule, tighter tubes like .640 and .650 tend to favor small TSS pellets while .660 leans a little more all-around. Pattern your gun with a few different loads to find the combo that prints tightest for you.
Is a ported choke like the Head Hunter better than non-ported?
Porting helps bleed off gas and can assist in stripping the wad from the shot column for cleaner separation, and many hunters like the barrel-extension look it adds. Non-ported tubes are a touch easier to clean, so it often comes down to preference. Both versions of the Head Hunter are held to the same quality and pattern standards.
How far can I reliably shoot turkeys with this choke?
That depends on your gun, your load and your own patterning, but the Head Hunter is built to stretch effective range well beyond a factory full choke. Many hunters report clean, dense patterns holding out to 40, 50 yards and beyond with the right premium load. Always confirm your maximum range on paper before taking it into the woods.





Reviews
There are no reviews yet.