Description
The Jeb's Head Hunter Turkey Choke has earned a serious reputation in the turkey woods, and this .655 constriction model is machined specifically for the Beretta A400 Optima H.P. bore. Made in the U.S.A. from stainless steel with a matte finish, it's an extended, ported design built to pull the wad away from the shot column cleanly so more pellets land where they count. The result is the kind of dense, even pattern that turns a decent turkey gun into a headhunter out to longer ranges.
What Makes the Head Hunter Pattern So Tight
The secret is Jeb's patented multi-staged interior bore. Instead of a single abrupt constriction, the shot column is worked down in stages, which lets the wad separate from the payload without disturbing the pellets. That clean separation is why folks see their pattern percentages jump compared to a factory full choke. This isn't marketing fluff either, Jeb's chokes set a record at the NWTF Still-Target Championships back in 2017, and that was before TSS loads were even common.
Dialing In Your A400 Turkey Load
The .655 constriction is a sweet spot for a lot of modern turkey ammo, and it shines with tungsten super shot. Guys running TSS and Federal's flight-control loads through Head Hunter chokes regularly report bird-flattening pattern density in the head and neck zone at 40, 50, even 60 yards. It handles lead and copper-plated loads too, so you've got room to experiment. If you're not sure which load to pair with it, Jeb's own customer service is known for talking hunters through a choke-and-load setup that patterns right for their gun.
Built for the Long Haul
The ported design vents gas to help tame muzzle rise, and the stainless construction shrugs off weather and heavy round counts. Thread it into your A400 hand-tight, pattern a few loads, and you'll have a dedicated turkey setup you can trust season after season.
Key Specifications
- Manufacturer: Jeb's Choke Tubes
- Manufacturer Part Number: JPC-12H1/655
- UPC: 643906923624
- Gauge: 12 Gauge
- Choke Type: Turkey
- Series: Head Hunter
- Constriction: .655
- Choke System: Beretta A400 Optima H.P.
- Style: Extended, Ported
- Material: Stainless Steel
- Finish: Matte
- Country of Origin: Made in U.S.A.
- Chokes Included: 1
- Shipping Weight: 0.22 lb
What’s Included
- 1 Jeb's Head Hunter ported turkey choke tube (12ga Beretta A400 Optima H.P., .655 constriction)
Frequently Asked Questions
Will this Head Hunter choke fit my Beretta A400?
This model is machined for the Beretta A400 Optima H.P. choke system, which is the standard threading on most A400 shotguns. If your barrel is marked Optima H.P. or Optima-Bore H.P., you're set. When in doubt, check the markings on your barrel or use Jeb's interchange guide to confirm before ordering.
Is the .655 Head Hunter a good choice for TSS turkey loads?
Absolutely. The .655 constriction is a popular pairing for tungsten super shot and modern flight-control wad loads, and hunters consistently report very dense head-and-neck patterns at extended range. It also handles lead and copper-plated loads, so you have room to test a few options. Patterning your specific load on paper is always the best way to confirm your effective range.
Does the ported design actually help?
The porting vents gas at the muzzle, which helps cut down on muzzle rise so you can stay on target. On the ported Head Hunter, it also aids clean separation of the wad from the shot column, which is a big part of why these chokes pattern so tightly. Just plan to clean the ports after a hunt to keep it performing at its best.
How do I install and care for the Head Hunter choke?
Make sure your A400 is unloaded, back out the existing choke, then thread the Head Hunter in by hand until snug without overtightening. Check the tightness now and then during a range session or hunt, since chokes can loosen with repeated firing. Wipe it down and clean the ports after each outing to protect the pattern and extend the life of the tube.




Reviews
There are no reviews yet.