Description
The JEBS Headhunter turkey choke is what takes a .410 from a fun little smoothbore to a real spring gobbler killer. This is the Extra Full model built for Browning Invector barrels, running a tight .381 exit diameter that squeezes your shot into a dense, even wall of pellets. It's a non-ported tube in a matte finish, and it's cut from 17-4 stainless heat treated to around 44 Rockwell, so it handles lead, steel, Hevi-Shot, and tungsten super shot without complaint.
What the .381 Constriction Does for Your .410
The magic here is JEBS' patented multi-stage interior bore. Instead of one abrupt cone, the tube stages the constriction to help the shot and wad cup separate cleanly as they leave the barrel. That translates to fewer flyers and a tighter core, which matters a ton on a small-bore .410 where every pellet counts. Hunters running this choke with #9 or #10 TSS regularly report patterns that hold together out to 40 yards and beyond, the kind of results that make a single-shot or pump .410 punch way above its weight.
Pairing the Headhunter Extra Full with TSS
The .410 lives and dies by pattern density, and this choke was built with modern high-density ammo in mind. Load it with quality tungsten super shot from the popular turkey lines and you're looking at real 40-yard confidence out of a gun most folks think of as a starter shotgun. It's a favorite setup for youth hunters and anyone who likes carrying a light gun through the timber, and plenty of first birds have fallen to this exact combination.
Fit and Build Notes
Make sure your shotgun uses the standard Browning Invector thread pattern before ordering, since JEBS offers this same Headhunter in several different choke systems. If you're unsure, JEBS publishes an interchange guide to match the tube to your barrel. Once it's threaded in, this thing just works, and it'll outlast the factory tube it replaces by a mile.
Key Specifications
- Manufacturer: JEBS Choke Tubes
- Model: Headhunter Turkey Choke
- Manufacturer Part Number: JPC-410C/XF
- UPC: 640970860077
- Gauge: .410
- Choke System: Browning Invector
- Constriction: Extra Full
- Exit Diameter: .381
- Porting: Non-Ported
- Finish: Matte
- Material: 17-4 Stainless Steel
- Hardness: 44 Rockwell
- Compatible Shot: Lead, Steel, Hevi-Shot, Tungsten (TSS)
- Intended Use: Turkey Hunting
- Shipping Weight: 0.12 lbs
What’s Included
- JEBS Headhunter .410 Browning Invector Extra Full choke tube (1)
Frequently Asked Questions
Will the JEBS Headhunter .410 choke fit my shotgun?
This tube is cut for the Browning Invector thread pattern in .410, so it drops into any barrel using that standard system. JEBS makes the same Headhunter Extra Full for other setups like Remington, Stevens, and Beretta/Benelli Mobil, so double-check your barrel's choke system before ordering. If you're not sure, JEBS offers an interchange guide to match the right tube to your gun.
Can I shoot TSS through the Headhunter Extra Full?
Yes. The tube is made from 17-4 stainless heat treated to about 44 Rockwell, which handles tungsten super shot, Hevi-Shot, steel, and lead. TSS in #9 or #10 is a popular pairing and is where this choke really shines, delivering dense patterns that stretch a .410's effective range.
How far can I pattern a .410 with this choke?
With quality TSS turkey loads, hunters routinely see tight, killing patterns out to 40 yards and sometimes a bit past it. The .381 constriction and multi-stage bore keep the core dense, which is exactly what a small-bore .410 needs. As always, pattern your specific gun and load at the range to confirm your own comfortable distance.
Is the Headhunter .410 tube ported?
No, this is the non-ported version in a matte finish. Non-ported tubes keep things simple and put all the constriction to work on the pattern rather than venting gas. It's a clean, durable upgrade over the factory choke that came with your .410.





Reviews
There are no reviews yet.