$95.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Suppressor end caps get lost, dinged up, or swapped between cans more often than most folks expect, and IWI made it easy to keep a spare or replacement on hand. The IWSVECSS6 is the vented stainless steel front cap sized for 5.56 NATO, .223 Rem, and 6mm bores, built to thread onto IWI's IWS6 and IWS6K suppressors. It wears a black finish that matches the rest of the can, and at right around an ounce it adds nothing meaningful to the front end of your rifle.
The vented design is all about flow management. Ports in the cap give propellant gas an easier path out the front of the suppressor, which cuts down on backpressure, gas blowback at your face, and the carbon fouling that builds up in a hard-running action. That matters most on gas-hungry setups like short-barreled ARs, Tavors, and Galil ACE rifles, where a fully sealed can tends to turn every range session into an eye-watering affair. The trade-off is a slightly louder signature than a closed cap, which is exactly why IWI built the IWS line with user-changeable end caps in the first place. Run vented when cycling and comfort come first, swap to the non-vented cap when maximum sound reduction is the goal.
This cap is machined from stainless steel, the same tough material philosophy IWI applied to the rest of the IWS suppressor family, which is full-auto rated and approved for short barrels. It installs and removes by hand with basic suppressor tools, so tuning your setup between range trips takes a minute, not an afternoon. If you own an IWS6 or IWS6K, having both cap styles in the range bag means one can covers everything from a quiet bolt gun day to running a hot carbine on the clock. It is a small part that makes a noticeable difference in how your suppressed rifle behaves.
It is made for IWI's 6mm-bore IWS line, meaning the full-size IWS6 and the compact IWS6K. Both cans use user-changeable front caps, so this piece threads on in place of the factory cap. It is not intended for IWI's larger bore 7.62 or 6.5mm suppressors, which use their own caps.
The vented cap lets more gas escape out the front of the suppressor, which lowers backpressure, reduces gas blowback at your face, and helps semi-autos cycle cleaner. The non-vented cap seals the front for the best possible sound reduction but sends more gas back through the action. Most people run vented on gassy carbines and SBRs, and closed on bolt guns or anytime quiet is the priority.
Yes, the IWS6 and IWS6K ship with a vented cap installed from the factory. This listing is for a standalone replacement or spare, which is handy if your original cap gets damaged, worn, or misplaced, or if you keep multiple caps set up for different hosts.
There is some trade-off, since venting gas out the front adds a bit to the sound and shot signature compared to a closed cap. On most 5.56 carbines the difference is modest, and plenty of people find the reduction in gas to the face well worth it. If you want the quietest setup possible, keep a non-vented cap on hand and swap based on the day's shooting.
| UPC | 818004025222 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | IWSVECSS6 |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Black |
| Model | |
| Product Type | Front End Cap |
| Shipping Weight | 0.067 |
You must be logged in to post a review.
Reviews
There are no reviews yet.