0
0

IWI LH QD Muzzle Brake 1/2×28 for IWI Suppressors – IWSQDMB28

UPC: 818004025369

$133.99

35 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A quick-detach suppressor is only as good as the mount under it, and that is exactly the job this brake was built for. The IWI LH QD Muzzle Brake in 1/2×28 threads onto any standard 5.56 muzzle and gives you a dedicated attachment point for IWI's QD suppressors. The external threads are cut left-hand on purpose. As the rifle cycles and torque builds during firing, that reverse thread direction works to keep the suppressor snugged down instead of walking loose, which is a real concern with some quick-attach systems after a few magazines of rapid fire.

Why Run the IWI QD Muzzle Brake Without a Can

Even with nothing mounted on it, this is a legitimate muzzle brake. The ported design redirects gas to cut felt recoil and help keep the muzzle flat, so your rifle shoots softer on the days the suppressor stays home. That makes it a smart choice over a plain thread adapter. There is also a practical bonus when the can is on: the brake takes the initial blast of high-pressure gas and debris leaving the bore, which eases the beating your suppressor's blast baffle takes over time.

Spreading One Suppressor Across Multiple Rifles

If you own one can and several hosts, this is the piece that makes that setup work. Leave a mount torqued on each rifle, then spin your suppressor from one to the next in seconds. The 1/2×28 pitch covers AR-15s in 5.56 NATO and .223 along with most other small-bore rifles wearing standard threading. IWI also offers this same mount in 5/8×24 for .308-class barrels, so you can outfit a whole safe around a single silencer.

Fit and Finish on the IWI LH QD Brake

The brake wears a black finish that matches most rifle builds and comes in at a few ounces, so it will not throw off the balance of a lightweight carbine. Installation is the same as any standard muzzle device on 1/2×28 threads. If you are running an IWI suppressor or planning to, this is the mount that ties the whole system together.

Key Specifications

  • Manufacturer: IWI – Israel Weapon Industries
  • Manufacturer Part Number: IWSQDMB28
  • UPC: 818004025369
  • Product Type: QD Muzzle Brake / Suppressor Mount
  • Barrel Thread Pitch: 1/2×28
  • Suppressor Attachment: Left-hand external QD threads
  • Compatibility: IWI QD suppressor line; standard 1/2×28 threaded 5.56/.223 barrels
  • Color: Black
  • Weight: Approx. 3.6 oz (0.226 lb)

What’s Included

  • IWI LH QD Muzzle Brake 1/2×28

Frequently Asked Questions

Will the IWI LH QD Muzzle Brake fit my AR-15?

If your barrel has standard 1/2×28 muzzle threads, which covers the vast majority of 5.56 and .223 AR-15s, it will thread right on. Install it like any other muzzle device and check alignment with the bore before torquing it down. For .308-class rifles with 5/8×24 threads, IWI makes the same brake in that pitch.

Which suppressors work with this IWI QD mount?

It is built for IWI's quick-detach suppressor line, which spins onto the brake's left-hand external threads. The reverse thread direction means firing torque works to tighten the can rather than loosen it. It is not a universal mount, so suppressors from other QD systems will not attach to it.

Can I shoot with this muzzle brake when the suppressor is off?

Absolutely, and that is part of the appeal. The ported brake design reduces felt recoil and helps control muzzle movement on its own, so the rifle still shoots comfortably unsuppressed. Just be aware that like any brake, it directs blast to the sides, so your neighbors on the firing line will notice.

Should I pick the IWI QD muzzle brake or the QD flash hider?

Both serve as mounts for IWI's QD suppressors, so the choice comes down to how the rifle behaves with the can off. The brake gives you recoil reduction, while the flash hider knocks down visible signature for low-light work. A brake at the muzzle can also help shield the suppressor's blast baffle from the initial gas hit, which is a nice long-term perk.

Additional information

UPC

818004025369

Manufacturer

Manufacturer Part Number

IWSQDMB28

Color

Black

Model

Product Type

Muzzle Brake

Shipping Weight

0.226

Reviews

There are no reviews yet.

Be the first to review “IWI LH QD Muzzle Brake 1/2×28 for IWI Suppressors – IWSQDMB28”