$95.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The IWS7 ships from the factory with a vented front cap that prioritizes gas flow, which is great for keeping a gas gun running smooth. But when the mission calls for maximum sound reduction, this is the part you want. IWI's non-vented front cap closes off the front of the can and forces expanding gas to work through the full baffle stack instead of escaping early, and that translates to a noticeably quieter report at the muzzle.
Swappable end caps are one of the smarter features IWI built into the IWS7 line, and this cap is the other half of that system. Vented cap for hard-running semi-autos and high round counts, non-vented cap for hunting, precision work, or anytime hearing protection and low signature matter most. Having both in your range bag means one suppressor can genuinely cover two jobs. The 7.62mm bore keeps you covered across the IWS7's rated .30 caliber loads, so you're not giving up the can's versatility to gain the quieter setup.
This cap is machined from stainless steel with a black finish, the same tough material family IWI uses in the IWS7's laser-welded body. That matters on a front cap, since it lives at the hottest, highest-pressure point of the suppressor. Stainless shrugs off heat and erosion better than lighter alloys in this spot, and at roughly an ounce, you won't notice the weight difference on the end of your rifle.
Installation is straightforward: thread off the factory cap, thread this one on, and you're set. No gunsmithing, no special fixtures. If you own an IWS7 and you've been curious how quiet it can really get, this cap is the answer. It's a small part that makes a real difference, and it's the kind of accessory worth keeping on hand even if you mostly run the vented setup.
The vented cap that comes on the IWS7 lets extra gas escape out the front, which helps gas-operated rifles cycle smoothly and keeps back pressure low. This non-vented cap closes off that path, pushing more gas through the baffles for the best sound suppression the can offers. Think of it as trading a little gas flow for a quieter shot.
This cap is made for IWI's IWS7 line of 7.62mm suppressors built with stainless steel components. It's caliber-matched to the can's .30 caliber bore, so it maintains the suppressor's full rating. If you run the titanium version or a different caliber IWS model, check for the matching cap instead.
Not at all. The IWS7 was designed with user-changeable end caps, so it's a simple unthread-and-replace job you can do at the bench or at the range. Just make sure the can is cool before you handle it, and snug the new cap down properly before shooting.
It can, especially on gas guns. Closing the front vent raises back pressure slightly compared to the vented cap, which may increase gas blowback and bolt speed a touch on semi-autos. Bolt guns and shooters chasing maximum quiet won't mind at all, and many folks keep both caps handy to match the setup to the day's shooting.
| UPC | 818004025314 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | IWSNVECSS7 |
| Caliber/Gauge | 7.62MM |
| Color | Black |
| Model | |
| Product Type | Front End Cap |
| Shipping Weight | 0.065 |
You must be logged in to post a review.
Reviews
There are no reviews yet.