Description
The Redding Instant Indicator with Dial for 260 Remington is one of those bench tools that quietly makes your handloads better. It gives you a fast, repeatable way to measure the shoulder position of fired and sized cases, along with bullet seating depth, so you can actually see what your dies are doing instead of guessing. The whole thing is built around a die body with a precision dial indicator mounted up top, reading to within .001 of an inch. If you load for a 260 and care about consistency, this is the kind of feedback that separates ragged groups from tight ones.
What the 260 Remington Instant Indicator Measures
The headspace reading runs from the case shoulder to the base, which is exactly the number you need when you're setting a full-length sizing die for the right amount of shoulder bump. Bump too much and you work-harden your brass and shorten its life. Bump too little and you fight chambering. This tool lets you compare a fired case against a sized one and adjust your die to land right where you want it. Drop in the included bore diameter bushing and you can check bullet seating depth and base-to-ogive measurements too.
Putting the Instant Indicator to Work
Beyond die setup, there's a long list of jobs this handles. You can sort cases that were fired in two different rifles, sort sized brass for uniformity, check trim length consistency, and sort bullets so your seating depths stay honest from round to round. The included range adapter is a nice touch, letting you use the indicator at the range or in the field without a press. For a 260 Remington handloader chasing repeatable results, it's a straightforward way to tighten up every stage of the process.
Redding builds these in the USA, and the fit and finish reflect it. The dial is included with this 27531 model, so you're ready to go out of the box once you've read through the instructions.
Key Specifications
- Manufacturer: Redding
- Model / MPN: 27531
- Cartridge: 260 Remington
- Type: Instant Indicator Headspace and Bullet Comparator
- Dial Indicator: Included (1" x .001")
- Measurement Precision: Within .001 of an inch
- Headspace Reference: Case shoulder to base
- Country of Origin: Made in USA
- UPC: 611760275319
What’s Included
- One Redding Instant Indicator die body for 260 Remington
- One 1" x .001" dial indicator
- One bore diameter bushing
- Surface contactor
- Shoulder contactor
- Headspace gauge
- Range adapter
- Complete instructions
Frequently Asked Questions
What does the Redding Instant Indicator for 260 Remington actually measure?
It measures the case shoulder position of fired and sized brass along with bullet seating depth, all to within .001 of an inch. The headspace reading is taken from the case shoulder to the base, which is the number you want when setting up a full-length sizing die for proper shoulder bump. It also lets you check seating depth uniformity and base-to-ogive measurements.
Does this 27531 model come with the dial indicator?
Yes. This is the version that ships with the dial indicator already included, so you don't need to buy one separately. You'll also get the bore diameter bushing, surface contactor, shoulder contactor, headspace gauge, range adapter, and full instructions.
Can I use the Instant Indicator for cartridges other than 260 Remington?
The Instant Indicator is built for the cartridge listed, but it can work for a family of cartridges that share the same shoulder angle. For bullet seating depth checks on other calibers, you'd simply add a standard Redding sizing bushing of the proper bore diameter. For straight 260 Remington work, everything you need is in the box.
Do I need a reloading press to use it?
Not necessarily. The included range adapter lets you use the Instant Indicator at the range or in the field without a press, which is handy for load development away from the bench. For standard die setup at home it mounts in your press just like a die.




Reviews
There are no reviews yet.