Description
If you're loading for the 6.5×47 Lapua and chasing tight groups at distance, the Redding Instant Indicator is the kind of tool that quietly makes your handloads more consistent. It mounts right in your press and gives you a quick, repeatable way to compare the shoulder position on fired and sized cases, so you can see exactly how much your full-length die is bumping the shoulder. That takes the guesswork out of headspace and helps keep your brass alive longer.
This is the model without the dial indicator (part number 17479), so you'll supply your own 1 inch travel, .001 inch dial indicator or use one you already have on the bench. Everything else needed to measure is in the box, including the bore diameter bushing matched to the cartridge, the surface and shoulder contactors, the headspace gauge, and full instructions.
What the 6.5×47 Lapua Instant Indicator Actually Does
Beyond shoulder bump, this tool earns its keep in a handful of ways. You can check bullet seating depth uniformity by dropping in the proper bore diameter bushing, sort cases that were fired in different rifles, verify trim length consistency, and even sort bullets by base to ogige length. For a precision cartridge like the 6.5×47, where small inconsistencies show up on the target, that level of sorting pays off.
Why the 6.5×47 Lapua Deserves This Kind of Attention
The 6.5×47 Lapua was built for accuracy. It came out of European 300 meter competition and uses a small rifle primer for a stronger case head, which makes it a favorite for mid to long range precision work. A tool like the Instant Indicator helps you get the most out of that case by letting you uniform your ammo without needing years of experience behind a set of calipers. The readings are fast and straightforward, which means you'll actually use it on every batch rather than letting it collect dust.
Key Specifications
- Manufacturer: Redding
- Cartridge: 6.5x47mm Lapua
- Model: Instant Indicator (without Dial Indicator)
- Manufacturer Part Number: 17479
- UPC: 611760174797
- Measurement Resolution: 0.001 inch
- Dial Indicator: Not included (user supplied, 1 inch travel x .001 inch)
- Bullet Diameter: 0.264 inch
- Country of Origin: USA
- Type: Headspace and Bullet Seating Depth Comparator
What’s Included
- Instant Indicator body for 6.5×47 Lapua
- One bore diameter bushing
- Surface contactor
- Shoulder contactor
- Headspace gauge
- Complete instructions
Frequently Asked Questions
Does the 6.5×47 Lapua Instant Indicator come with a dial indicator?
No. Part number 17479 is the version without the dial indicator, so you'll need to supply your own. A standard 1 inch travel dial indicator reading in .001 inch increments works, and many reloaders already have one on the bench. If you'd rather have it included, Redding offers the same tool bundled with a dial under part number 27479.
What can the Redding Instant Indicator measure?
It compares the shoulder position of fired and sized cases so you can set up your full-length sizing die for the exact shoulder bump you want. It also checks bullet seating depth uniformity, sorts cases fired in different rifles, verifies trim length, and sorts bullets by length. All of it reads within a thousandth of an inch.
Will this Instant Indicator work for cartridges other than 6.5×47 Lapua?
The tool is set up for the 6.5×47 Lapua as listed, but it can be used on a family of cartridges that share the same shoulder angle. The included bore diameter bushing is matched to this cartridge. For a different case head or shoulder, you'd want the correct dedicated unit.
Do I need a reloading press to use the Instant Indicator?
The Instant Indicator threads into your press in place of a die for normal use. Redding also offers a Range Adapter that lets you use the tool at the range or in the field without a press, though that adapter is a separate item.




Reviews
There are no reviews yet.