Description
Zeroing a thermal scope has always been a pain because thermal only sees heat, and paper targets just don't show up. The Infrared-ID coyote target solves that with a passive material that creates its own thermal contrast against the background, giving you a crisp, life-shaped signature to aim at without any power source, batteries, or chemical heaters. It's the same technology Reshet Graf builds for military and law enforcement use, scaled down for hunters and recreational thermal shooters.
How the Infrared-ID Coyote Target Works
The material reflects the cold temperature of the sky against a warmer background, and that difference is what your scope picks up as a bright, defined image. Give it a slight tilt toward the open sky and it reacts on its own, day or night, in cold or heat. There are no wires to short out, nothing to plug in, and nothing to warm up before you shoot. When conditions are right you'll see a sharp coyote silhouette downrange that behaves a lot like the real thing through your optic.
Why a Coyote Shape Matters for Thermal Training
Hunting through a thermal scope is a different world, and telling a coyote apart from a dog or a fox at distance takes reps. A life-shaped predator silhouette lets you train your eye on what a real target looks like in heat vision before you're sitting in a field at 2 a.m. with an actual song dog trotting a fence line. It's just as useful for confirming your zero, since the built-in contrast gives you a consistent aim point without the blooming or flare you get from improvised heat sources.
Built to Take a Beating
This is weather-tough material meant to live outdoors. It holds up to repeated shots, stands up to the elements, and Infrared-ID targets are typically supplied with repair patches so you can paste over holes and keep training instead of tossing the whole thing. For anyone running a thermal setup on coyotes, hogs, or general night work, it's one of the simplest ways to make sure your optic and your eye are both dialed in.
Key Specifications
- Manufacturer: Reshet Graf Ltd (Infrared-ID)
- Manufacturer Part Number: RCOYOTEL1
- UPC: 619364993202
- Target Type: Passive thermal coyote silhouette
- Power Source: None required (passive material)
- Intended Use: Thermal scope zeroing, calibration, and training
- Compatible Optics: Thermal and fused imaging sights
- Use Environment: Outdoor, all-weather
- Country of Origin: Israel
What’s Included
- Passive thermal coyote silhouette target
- Thermal repair patches
Frequently Asked Questions
Does the Infrared-ID coyote target need batteries or a heat source?
No. It's fully passive and runs on nothing but the natural temperature difference between the sky and the ground. You give it a slight tilt toward open sky and the material generates its own thermal contrast, so there's nothing to plug in, charge, or warm up.
How far out can I use this coyote target?
Life-size predator targets like this coyote are typically visible out to around 100 yards through a thermal optic, and they're excellent for close-range zeroing work in the 25 to 50 yard range. Your effective distance depends on your scope's resolution and the day's conditions.
Why is my thermal coyote target hard to see sometimes?
Thermal targets rely on the contrast between the cold sky and the warmer background, so weather plays a big role. If air and ground temperatures are close, cloud cover is heavy, or the target isn't angled toward open sky, the signature can fade. Adjust the tilt and check conditions and it should pop back into view.
Can I reuse the target after shooting it?
Yes. The material is built to take repeated hits, and the included thermal patches let you cover shot holes on the cooler areas or add fresh aim points on the hot areas. That keeps your training going without swapping out the whole target.




Reviews
There are no reviews yet.