Description
The Inforce WML Gen 3 in Flat Dark Earth is a compact, rail-mounted weapon light built for folks who want serious output without turning their rifle into a wiring project. It throws 450 lumens backed by 10,000 candela, giving you a beam that reaches out to roughly 656 feet, or 200 meters. That combination handles close-quarters work on a shotgun or PCC and still has enough reach for mid-range rifle use. All of that runs off a single CR123A battery with about 1.5 hours of runtime on high.
What Sets the WML Gen 3 Apart
The whole appeal here is simplicity. The integrated clamp locks onto MIL-STD-1913 Picatinny rails with no tools required, so there are fewer moving parts and less to go wrong. The body is glass-reinforced nylon, which keeps it light at around 3.7 ounces and 4.25 inches long while shrugging off dirt, sand, and hard knocks. It's rated waterproof down to 66 feet, so rain, mud, or a creek crossing won't slow it down.
Running the Inforce WML Gen 3
Control comes from a contoured, non-slip rear button shaped to sit under your support-hand thumb. That single switch cycles between constant-on, momentary, and a disorienting strobe, and it stays easy to work even with gloves on. A flip safety keeps the light from firing off before you're ready, and a quarter turn of the head engages a full lockout for transport and storage.
Where the WML Gen 3 Fits
One thing worth knowing about the 450-lumen output: don't let the number fool you into thinking it's weak. The beam spreads a bit wider than some narrow-throw lights, which helps peripheral awareness indoors and keeps you from getting blasted with wall bounce in a hallway or stairwell. Mounted on an AR-15, a shotgun, or a pistol-caliber carbine, this one earns its keep as a no-nonsense light. Inforce backs it with a lifetime warranty to the original owner.
Key Specifications
- Output: 450 lumens
- Beam Intensity: 10,000 candela
- Beam Range: 656 ft (200 m)
- Runtime: 1.5 hours on high
- Battery: 1x CR123A
- Waterproof Rating: IPX8, submersible to 66 ft (20 m)
- Housing Material: Glass-reinforced nylon
- Weight: 3.70 oz
- Length: 4.25 in
- Head Diameter: 1.05 in
- Mount: Integrated clamp for MIL-STD-1913 Picatinny rail
- Switch Modes: Constant, momentary, strobe
- Color: Flat Dark Earth
- Manufacturer: INFORCE
- Model: WML
- Manufacturer Part Number: IF71011DE
- UPC: 810119011923
What’s Included
- Inforce WML Gen 3 weapon light (Flat Dark Earth)
- 1x CR123A battery
- Instruction manual
Frequently Asked Questions
What firearms will the Inforce WML Gen 3 mount on?
The WML Gen 3 uses an integrated clamp that fits MIL-STD-1913 Picatinny rails, so it works on AR-15s, shotguns, and pistol-caliber carbines with a compatible rail section. No tools are needed to mount or remove it. Many folks run it on the side of the handguard to keep the top rail clear for optics and sights.
Is 450 lumens bright enough for home defense or indoor use?
It is plenty for indoor distances. The Gen 3 pairs 450 lumens with a slightly wider beam than some narrow-throw lights, which actually helps peripheral awareness and cuts down on harsh wall bounce in hallways and stairwells. Paired with the momentary switch, it gives you usable light without blinding yourself off white walls.
How does the WML Gen 3 hold up to water and rough conditions?
The housing is glass-reinforced nylon, which keeps it light while resisting dirt, sand, and impacts. It carries an IPX8 rating and is submersible down to 66 feet, so rain, mud, and creek crossings are not an issue. It's a genuinely rugged setup for a light this compact.
What battery does the Inforce WML Gen 3 use and how long does it run?
It runs on a single CR123A battery and delivers about 1.5 hours of runtime on high. A quarter turn of the head engages a lockout mode for storage and travel, which prevents accidental activation and helps preserve battery life between uses.





Reviews
There are no reviews yet.