$1,099.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Backpressure is the thing nobody warns you about with your first can. Gas blowing back through the action, a face full of fumes, and a rifle that suddenly needs an adjustable gas block to run right. The HUXWRX FLOW 6K skips all of that. Its Flow-Through design routes gas forward and out the front of the suppressor instead of dumping it back into your receiver, so bolt velocity stays within about one percent of your unsuppressed baseline. Bolt guns, gas guns, short barrels, it all just runs, no tinkering required.
This is the first dedicated 6mm can from HUXWRX, and it stretches well past that. One stamp covers 6mm and 6 ARC, 5.56 and .223, .22 LR, 17 HMR, 5.7×28, and 5.45×39, with no barrel length restrictions on any of them. The whole unit is DMLS 3D-printed from heat-treated 17-4 stainless steel, which lets HUXWRX build internal geometry that machining simply can't produce. It's full-auto rated and passes six cycles of the SOCOM reliability stress test, so a heavy range day isn't going to hurt it. The integrated GEOFLASH end cap knocks down muzzle flash without affecting cycling or service life, and the C-Series high-temp Cerakote in Flat Dark Earth shrugs off heat and corrosion.
The included 5/8-24 QD flash hider uses the HUXWRX Torque Lock system, a tool-less quarter-turn mount that locks the can down tight and returns to the same position every time. That consistent interface is a big reason point of impact shift stays minimal and repeatable, which matters a lot if you're running this on a precision 6 ARC build. It also plays nice with the rest of the HUXWRX QD 556 and QD 6 brake and flash hider lineup, so moving it between hosts is quick.
At 5.5 inches overall and 12.4 ounces, it keeps your rifle handy instead of turning it into a boat oar. HUXWRX backs it with a lifetime warranty, and detailed cleaning is only recommended every 2,500 rounds. For anyone building around 6mm or wanting one can to cover a whole safe of small-bore rifles, this one earns the stamp.
It's rated for 6mm and 6 ARC along with 5.56/.223, .22 LR, 17 HMR, 5.7×28, and 5.45×39. There are no barrel length restrictions for any of the supported calibers, so short-barreled hosts are fair game. That range makes it easy to move one can across a whole rack of small-bore rifles.
This is the big selling point of HUXWRX's Flow-Through design. Gas is directed forward and out the front of the can instead of back through your action, so bolt velocity stays within roughly one percent of unsuppressed. You shouldn't need an adjustable gas block, buffer swaps, or any other tuning to keep your rifle running reliably.
It uses the HUXWRX QD system with Torque Lock, a tool-less setup that secures the can with a quarter turn onto a HUXWRX QD muzzle device. A 5/8-24 QD flash hider comes in the box, and it's also compatible with other QD 556 and QD 6 brakes and flash hiders. The mount is designed for minimal, repeatable point of impact shift between removals.
Yes, it's full-auto rated and passes six cycles of the SOCOM reliability stress test, with each cycle being eight 30-round magazines. HUXWRX recommends a detailed cleaning every 2,500 rounds to keep it in top shape. The 17-4 stainless construction and high-temp Cerakote are built for hard, sustained use, and it's covered by a lifetime warranty.
| UPC | 706433764440 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 3222 |
| ATF Type | Silencer |
| Caliber/Gauge | 6MM |
| Color | FDE |
| Length | 5.5000 |
| Product Type | NFA – Silencer |
| Shipping Weight | 0.0 |
| Thread Pattern | 1/2"x28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.