Description
The Hornady Outfitter line was designed with real-world hunting challenges in mind. This .300 WSM loading pairs Hornady's advanced CX monolithic bullet with sealed, waterproofed nickel-plated brass to keep your ammunition reliable no matter what conditions you're hunting in. Whether you're dealing with wet weather, temperature swings, or the salt air of a coastal hunt, the waterproof primer and case mouth seals protect against corrosion that can ruin a hunt.
What Makes Hornady Outfitter CX Stand Out
The 180-grain CX bullet is a copper alloy design built from one solid piece of material, which means no jacket separation or fragmentation when it matters most. The bullet achieves uniform, controlled expansion while retaining more than 95 percent of its weight through the animal. That extra weight retention translates to deeper penetration and more consistent performance on tougher game. The polymer tip and boat-tail design give it a ballistic coefficient of 0.469, so the load shoots flat and carries energy well past 300 yards.
Nickel-Plated Case Protection
The nickel plating on the brass is the real standout feature here. Regular brass can corrode quickly if you're storing ammo in leather loops or hunting in wet conditions. The nickel finish resists that corrosion while feeding smoothly through most modern actions. Combined with sealed primers and case mouths, you get watertight protection that lets you trust your ammo even when conditions go sideways. This matters when you've spent months planning a hunt and can't afford a misfire or feeding issue.
Performance and Application
Loaded to 2900 fps with 3361 ft-lbs of muzzle energy, the 180-grain Outfitter CX is well-suited to deer, elk, and other medium to large game at moderate to extended ranges. The lead-free construction also makes these rounds compliant with specialized hunting regulations in certain areas. Twenty rounds per box keeps you stocked for a week in the field or range time sighting in before the season starts.
Key Specifications
- Caliber: .300 Winchester Short Magnum (.300 WSM)
- Bullet Weight: 180 grains
- Bullet Type: CX Monolithic (Copper Alloy eXpanding)
- Muzzle Velocity: 2900 feet per second
- Muzzle Energy: 3361 foot-pounds
- Ballistic Coefficient (G1): 0.469
- Case Material: Nickel-Plated Brass
- Rounds Per Box: 20
- Weight Retention: 95% or greater
- Primer: Sealed, watertight
- Application: Medium to Large Game Hunting
- Manufacturer: Hornady Manufacturing
- Manufacturer Part Number: 822034
- UPC: 090255719864
- Lead-Free: Yes
What’s Included
- 20 rounds of .300 WSM ammunition
- 180-grain CX monolithic bullets
- Nickel-plated brass cases
Frequently Asked Questions
Why are nickel-plated cases better for hunting than standard brass?
Nickel plating protects brass from corrosion caused by moisture, sweat, and humidity. If you're carrying ammo in leather loops or hunting in wet conditions, regular brass can corrode and either cause feeding issues or create cosmetic problems. The nickel finish also feeds smoothly through most modern actions and maintains its appearance through a full season.
What does the sealed primer and case mouth do on Hornady Outfitter ammunition?
The seals create a watertight barrier that protects the powder and primer from moisture damage. If you accidentally submerge ammo in water or carry it through rain and creek crossings, the sealed cases keep the internals dry and reliable. This is especially valuable if you're hunting in extreme or unpredictable weather conditions.
Is the CX bullet suitable for elk-sized game?
Yes. The 180-grain CX at 2900 fps with nearly 3400 ft-lbs of muzzle energy is well-suited to elk at reasonable hunting ranges. The monolithic construction and 95% weight retention deliver the deep penetration needed for reliable performance on larger game. Many serious elk hunters choose heavier bullets or higher velocities, but this load is effective on elk when placed correctly.
Can I reload the nickel-plated Hornady Outfitter cases?
Yes, many reloaders reuse Hornady Outfitter cases successfully. The nickel plating actually benefits reloaders because it resists corrosion and feeds smoothly through progressive presses. Just treat them like quality brass during sizing and inspection. Some reloaders appreciate the nickel cases so much they reload them multiple times.







Reviews
There are no reviews yet.