Description
This Hornady Match load puts serious accuracy into factory ammunition. The 180-grain ELD Match bullet sits in a sweet spot for the 7mm PRC, delivering the kind of ballistic performance that makes long-range competition possible without the hassle of handloading. At 2,975 fps from a 24-inch barrel, you're working with one of the flattest trajectories available in this caliber.
What Makes This ELD Match Load Different
The real story here is consistency. Hornady's engineers started with individually selected components, then loaded each round to exacting tolerances. The result shows up when you chronograph a string of shots—standard deviations in the single digits, not the 15+ range you'll see with typical factory loads. That kind of charge consistency translates directly to tighter groups and more predictable wind performance at distance.
The Heat Shield Tip Technology
Those polymer-tipped bullets have been engineered to handle the aerodynamic heating that occurs at extreme ranges. The Heat Shield tip doesn't melt or deform the way conventional polymer tips do, which means your ballistic coefficient stays consistent shot after shot. This matters more than you'd think when you're stretching that 0.401 G7 BC out past 1,000 yards.
Why This Matters for Your Competition
Whether you're punching paper at a precision rifle match or testing your long-range capabilities on steel, this ammunition performs. The lot-to-lot consistency lets you dial your scope once and trust your zero. The tight velocity and pressure control means less vertical stringing, which is where matches are won and lost.
Key Specifications
- Caliber: 7mm PRC
- Bullet Weight: 180 grains
- Bullet Type: ELD Match with Heat Shield tip
- Muzzle Velocity: 2,975 fps (24-inch test barrel)
- Muzzle Energy: 3,439 ft-lbs
- Ballistic Coefficient (G1): 0.796
- Ballistic Coefficient (G7): 0.401
- Sectional Density: 0.319
- Recommended Minimum Twist Rate: 1:8 inch
- Case Material: Brass
- Rounds per Box: 20
- Intended Application: Target and match shooting
- Manufacturer: Hornady
- Manufacturer Part Number: 80711
- UPC: 090255720747
What’s Included
- 20 rounds of Hornady Match 7mm PRC ammunition
Frequently Asked Questions
What's the difference between ELD Match and ELD-X bullets?
The ELD Match is engineered purely for target and competition accuracy with a high ballistic coefficient. ELD-X bullets are designed for hunting with a thicker jacket and internal features for controlled expansion. Both use Heat Shield tips, but ELD Match prioritizes consistency and precision over terminal performance.
How consistent is this factory ammunition?
Hornady achieves impressive consistency with standard deviations typically in the single digits, with independent testing showing velocities grouped within 25 fps across a 10-shot string. This level of consistency rivals quality handloads and makes the ammunition reliable for competition where repeatability matters.
What twist rate do I need for this 180-grain load?
Hornady recommends a minimum 1:8-inch twist rate to properly stabilize the 180-grain ELD Match bullet. Most modern 7mm PRC rifles come with 1:8 or faster, which handles this load very well.
Is this ammunition reloadable?
Yes, the brass cases can be reloaded after firing. The cases are carefully sorted by Hornady for uniformity in wall thickness and internal capacity, so they're actually good candidates for precision handloading.





Reviews
There are no reviews yet.