Description
The Hornady ELD-X in 6.5mm is one of those component bullets that bridges the gap between the match range and the hunting field. At 143 grains with a .264 diameter, it carries a .625 G1 ballistic coefficient (.315 G7) and a .293 sectional density, which puts it right at the front of the pack for 6.5mm hunting projectiles. The secret is the Heat Shield polymer tip, which resists the aerodynamic heating that softens ordinary tips at high velocity, so the bullet holds its shape and its BC all the way downrange.
What Sets the 6.5mm ELD-X Apart
This is a true all-range hunting bullet. The streamlined secant ogive and boat tail profile cut drag, while the AMP (Advanced Manufacturing Process) jacket keeps everything concentric for repeatable accuracy. Handloaders regularly see sub-MOA groups out of the 143 grain ELD-X in rifles with the recommended 1-8 twist or faster, and plenty of folks have no trouble ringing steel or holding on game well past 500 yards.
Terminal Performance You Can Count On
Where the ELD-X earns its keep is on impact. At conventional ranges with high velocity, the bullet expands immediately and keeps opening up as it drives through, backed by the InterLock ring that holds the core and jacket together. Hornady reports retained weights in the 85 to 90 percent range with a big mushroom and deep penetration, which translates to large wound channels and clean kills. At extended distances where velocity has bled off, the thin front jacket and composite tip still get the bullet expanding reliably.
Loading the 143 Grain ELD-X
This bullet is a favorite in the 6.5 Creedmoor, 6.5 PRC, 6.5×55, .260 Remington, and the other popular .264 caliber cartridges. It's a component bullet, so you'll be seating it into your own brass with your preferred powder and primer. The 4.1 inch overall box length and 100-count packaging make it easy to work up a load and stock up for the season. If you want the same bullet without rolling your own, Hornady loads it in their Precision Hunter factory ammunition.
Key Specifications
- Manufacturer: Hornady
- Model: ELD-X
- Manufacturer Part Number: 2635
- UPC: 090255226355
- Caliber: 6.5mm
- Bullet Diameter: .264"
- Bullet Weight: 143 Grain
- Bullet Style: Polymer Tip Boat Tail
- Ballistic Coefficient (G1): .625
- Ballistic Coefficient (G7): .315
- Sectional Density: .293
- Minimum Recommended Twist: 1-8"
- Application: Medium Game 50-300 lbs, Large Game 300-1500 lbs
- Quantity: 100 per Box
What’s Included
- 100 Hornady ELD-X 6.5mm (.264) 143 grain component bullets
Frequently Asked Questions
What barrel twist rate do I need for the 143 grain 6.5mm ELD-X?
Hornady lists a 1-8 inch twist as the minimum recommended rate to stabilize this long, high-BC bullet. Most modern 6.5 Creedmoor and 6.5 PRC barrels come with a 1-8 or faster twist, so you'll be in good shape. If your rifle has a slower twist, you may see less consistent accuracy at distance.
Is the Hornady ELD-X 6.5mm a loaded cartridge or a component bullet?
This is a component bullet only, meant for handloading. You'll seat these into your own brass with your chosen powder and primer. If you'd rather buy loaded ammo with the same projectile, Hornady offers it in their Precision Hunter line.
What cartridges can I load the 6.5mm 143 grain ELD-X in?
The .264 diameter works in any 6.5mm cartridge, including the 6.5 Creedmoor, 6.5 PRC, 6.5×55 Swedish, .260 Remington, and 6.5-284 Norma. Always reference current published load data for your specific cartridge. The 143 grain weight is one of the most popular choices across all of these.
How does the ELD-X perform on game at long range?
The ELD-X is designed as an all-range hunting bullet, expanding reliably at both close-range high velocities and the lower velocities you see way out there. Hornady reports retained weights around 85 to 90 percent with deep penetration and a wide mushroom. It tends to perform best when impact velocity stays at or below roughly 2,600 fps, which keeps expansion controlled rather than violent.






Reviews
There are no reviews yet.