Description
If you handload for a 6mm or .243 and you're building a load for ringing steel at distance or shrinking groups off the bench, the Hornady 108-grain ELD Match is a bullet that belongs on your shelf. It's one of Hornady's flagship target projectiles, and the 108-grain weight has become a go-to in the 6mm world for chambers like the 6mm ARC, 6mm Creedmoor, 6XC, and plenty of wildcats where a high-BC pill earns its keep.
What Makes the 6mm ELD Match Tick
The headline here is the Heat Shield polymer tip. Standard polymer tips can soften and deform from the friction heat of flight, which quietly changes your ballistic coefficient over distance. Hornady's Heat Shield material resists that aerodynamic heating and keeps the meplat consistent, so the BC you start with is the BC you keep all the way to the target. Pair that with a streamlined secant ogive and a boat-tail base, and you get a slick, low-drag profile that holds velocity and bucks wind.
Numbers That Matter When Loading the 108 ELD-M
This bullet carries a G1 ballistic coefficient of .536 and a G7 of .270, with a sectional density of .261. Those BCs aren't marketing fluff either, they're measured with Doppler radar and corrected to standard atmospheric conditions, so the drop and drift data you build your DOPE around actually matches real-world flight. The .243 diameter projectile uses a swaged lead core for balance and a concentric AMP jacket for the kind of uniformity that shows up on paper.
Twist Rate and Setup Notes
Hornady calls for a 1:8 inch twist as the minimum recommendation to properly stabilize the 108-grain ELD Match. If you're running a slower twist, this bullet probably isn't the right match for your barrel, but any modern 6mm or .243 cut at 1:8 or faster will wring out everything these have to offer. There's no cannelure on these, which is standard for a precision match bullet meant to be seated to your own tested depth. Grab a box, work up a load, and let the consistency do the talking.
Key Specifications
- Manufacturer: Hornady
- Model: ELD Match
- Manufacturer Part Number: 24561
- UPC: 090255245615
- Caliber: 6mm (.243 Diameter)
- Bullet Weight: 108 Grain
- Bullet Style: ELD-Match Polymer Tip Boat Tail
- Tip Material: Heat Shield Polymer
- Jacket Material: AMP
- Core Material: Lead
- G1 Ballistic Coefficient: .536
- G7 Ballistic Coefficient: .270
- Sectional Density: .261
- Cannelure: No
- Recommended Twist Rate: 1:8 inch (minimum)
- Quantity: 100 Per Box
What’s Included
- 100 Hornady 6mm (.243) 108 gr ELD Match bullets
Frequently Asked Questions
What twist rate do I need for the Hornady 108 gr ELD Match?
Hornady lists a 1:8 inch twist as the minimum recommended rate to stabilize this 108-grain bullet. A 1:8 or faster barrel in 6mm or .243 will get the most out of it. Slower twists may not fully stabilize this long, high-BC projectile.
What cartridges can I load these 6mm ELD Match bullets in?
These .243 diameter bullets work in any 6mm chambering with enough twist, including popular picks like 6mm ARC, 6mm Creedmoor, 6XC, and .243 Winchester. The 108-grain weight is a favorite in the 6mm ARC and other precision setups. Just make sure your barrel is cut at 1:8 or faster.
Are these loaded ammunition or component bullets?
These are component bullets for handloaders, not loaded cartridges. You'll need your own brass, primers, and powder to assemble finished rounds. Hornady also offers the ELD Match projectile in factory-loaded ammunition if you'd rather not reload.
What makes the Heat Shield tip different on the ELD Match?
The Heat Shield tip is built from a material that resists the aerodynamic heating a bullet sees in flight, so it keeps its shape and holds a consistent meplat. That keeps the ballistic coefficient stable all the way downrange. Hornady verifies these BCs with Doppler radar for data you can trust when building your load.







Reviews
There are no reviews yet.