Description
The Hornady ELD-VT .224 69-grain bullet was built to do two jobs that usually fight each other: fly like a serious match projectile and blow up like a dedicated varmint bullet. Hornady leaned on years of ballistic research to pull it off, giving reloaders a .224 diameter projectile that holds a 0.424 G1 ballistic coefficient and a 0.196 sectional density. That translates to a flat trajectory, less wind drift at distance, and rapid fragmentation once it hits a prairie dog or coyote.
What Sets the ELD-VT 69-Grain Apart
The secret is in the tip. These bullets use Hornady's Heat Shield tip, a high-temperature polymer designed to resist the aerodynamic heating that softens and deforms standard tips in flight. Keeping its shape all the way downrange means the bullet maintains its low drag over the entire trajectory, so your drops and wind calls stay honest at longer ranges. It's the same Heat Shield design Hornady developed for their premium ELD lineup.
Why the .224 69gr ELD-VT Hits Hard
Hornady uses a long, sleek match profile with a reduced core-to-bullet length ratio. That shaves weight while moving the center of gravity rearward, which boosts muzzle velocity and sharpens aerodynamic performance. The polymer tip drives into the bullet's internal air gap on impact and triggers fast, dramatic fragmentation, even at the lower velocities you see at extended distance. You get match-grade accuracy on paper and the kind of terminal performance varmint hunters want to see.
Loading the ELD-VT in Your .224 Rifle
This 69-grain weight is a natural fit for fast-twist .22 cartridges, and it's been a popular pick for the .22 Creedmoor crowd running 1:8 to 1:6.5 twist barrels. It works equally well in other .224 bore rifles set up for heavier-for-caliber projectiles. These are component bullets sold as a box of 100, so you'll be supplying your own brass, powder, and primers to work up a load for your rifle.
Key Specifications
- Manufacturer: Hornady
- Model: ELD-VT
- Manufacturer Part Number: 22772
- UPC: 090255227727
- Caliber: .22 Caliber
- Bullet Diameter: .224
- Bullet Weight: 69 Grain
- Bullet Type: Polymer Tip (Heat Shield)
- Ballistic Coefficient (G1): 0.424
- Sectional Density: 0.196
- Construction: Jacketed Lead Core, Polymer Tip
- Intended Use: Varmint / Target
- Quantity: 100 per Box
What’s Included
- 100 Hornady ELD-VT .224 69-grain bullets (component projectiles)
Frequently Asked Questions
What is the ELD-VT 69-grain bullet best used for?
It's a dual-purpose projectile built for varmint hunting and target shooting. The low-drag match profile gives you long-range accuracy, while the polymer tip drives rapid, explosive fragmentation on varmints like prairie dogs and coyotes. Hornady designed it to handle everything from long-range varmint hunts to precision competition.
What twist rate does the Hornady ELD-VT .224 69gr need?
This heavier-for-caliber bullet stabilizes best in faster twist barrels, commonly in the 1:8 to 1:6.5 range. It's a popular choice for the .22 Creedmoor and other fast-twist .224 rifles. If your barrel is set up for lighter, slower-twist loads, you'll want to confirm it can stabilize a 69-grain projectile before loading.
Are these loaded cartridges or component bullets?
These are component bullets only, sold as a box of 100 projectiles for handloaders. There's no brass, powder, or primer included. You'll work these up into your own loads using published data for your specific caliber and rifle.
What does the Heat Shield tip actually do?
The Heat Shield tip is a high-temperature polymer that resists the aerodynamic heating a bullet experiences in flight. Standard tips can soften and deform, which raises drag and hurts consistency downrange. By holding its shape, the Heat Shield tip keeps the ELD-VT at its lowest drag over the full trajectory for more predictable drops and wind calls.



Reviews
There are no reviews yet.